Hengesbach DSA 9648 Digital Display

Hengesbach DSA 9648 Digital Display for panel-installation has been designed for standard signals 0/4…20 mA or 0…+10 V DC. The device offers an integrated transmitter supply for direct connection of 2- an 3 wire transmitters for e.g. pressure or temperature. The connection of potentiometers is possible as well. Indicating range and decimal point are free programmable in the range of ± 99990 (fixed zero selected).

Hengesbach DSA 9648 Digital Display Features:

  • For standard signals 0/4…20 mA or 0…10 V
  • Indicating range and decimal point free programmable
  • Optional with max. 4 outputs, spdt relays or transistor
  • Led-display, 14,2 mm
  • Display range ± 9999(0) digits

Specification:

General information
Device Digital-display for signal-input DSA 9648
Application Displaying of standard-signals for pressure, temperature, …
Input
Current input 0/4…20 mA; Ri = 10 Ω
Voltage input 0…10 V DC; Ri = <100 k Ω
Potentiometer 0…1 kΩ/100 kΩ
Accuracy < 0,1% ±2 digit
Temperature coefficient 0,004%/K
Transmitter-supply U0 ca. 24V, Ri ca. 150 Ω, max. 50 mA (max. 25 mA at 4 relay-outputs)
Display
Range ± 9999(0) digit leading zero suppression
Parameter display LED 2-digit red, 7 mm (parameter- and output indicator)
Output
Relay SPDT<250VAC<250VA<2A,<300VDC<50VA<2A
Transistor max. 35 V AC/DC max. 100 mA, short circuit protected
Analog output 0/4…20 mA burden ≤ 500 Ω; 0/2…10V burden > 500 Ω, isolated,
automatic output changing (burden dependent)
Accuracy 0,1%; TK 0,01 %/K
Operating-conditions
Operating temperature -10…+55 °C
Auxiliary energy
Supply voltage 230 V AC ± 10%; 115 V AC ± 10%; 24 V AC ± 10 % or 24 V DC ± 15%
Power consumption max. 2,5 VA, with analog output 5 VA
Rated voltage 250 V~ acc. VDE 0110 between input/output/supply voltage
degree of pollution 2, over-voltage categoric III
Test voltage 4 kV=, between input/output/supply voltage
CE-conformity EN55022, EN60555, IEC61000-4-3/4/5/11/13
Design configuration
Panel case DIN 96×48 m, material PA6-GF; UL94V-0
Dimensions Front 96×48 mm, mounting depth 100mm
Weight max. 390 g
Electrical connection Clamp terminals, 2 mm² single wire, 1,5 mm² single wire, AWG14
protection IP 65, terminals IP 20, fingersafe acc. German BGV A3

Download Data Sheet: Digital Display for Signal Input DSA 9648 

Ref: Hengesbach.com

Other Article:

Share
%d bloggers like this: