Pulsar’s Flow Pulse Handheld Controller

Pulsar's Flow Pulse Handheld Controller
Flow Pulse Handheld Controller

Flow Pulse Handheld Controller is an indispensable tool for portable flow monitoring, offering a toolset that allows programming, monitoring and data acquisition. The unit is available to connect to pre-installed Flow Pulse sensors or as a self-contained kit, with instant feedback via its clear colour screen. For true portability, the Handheld Controller will power a Flow Pulse directly, giving instant feedback on flow rate for a dynamic assessment of system or pump performance.

The Flow Pulse Handheld is available as a stand-alone unit to use with pre-existing Flow Pulse sensors, or can optionally be purchased as a complete kit with Flow Pulse and a compact and convenient carry case. Mains or battery operation, with in-car charger.

  Another Article:

Specifications

Physical

Sensor body dimensions: 210 x 125 x 50mm (8.27 x 4.92 x 1.97in)
Sensor body weight: Nominal 0.6kg (1.3lbs)
Enclosure material/description: Polycarbonate UL94 V2 rated, with weather-proof connectors
Screen: 3.2” TFT LCD
Supplied cable length: 2 metres (9.8ft) minimum

Environmental

Enclosure & connectors protection: IP65
Max. and min. temperature (electronics): -20°C to +60°C (-4°F to +140°F)
Max. and min. temperature (battery charging): -20°C to +40°C (-4°F to +104°F)

Approvals

CE approval: Listed in the Certificate of Conformity within the manual

Datalogging

Storage media: Internal flash memory
Storage capacity: 3.8GB, 3.2million entry without trace, 800,000 entries with trace
Storage format: PC files
Storage access: File transfer to PC via USB – no driver required

Outputs

Analogue output: Not available
Digital output: Half Duplex RS485 to sensor, USB connection to PC for file transfer

Programming

Programmed parameter integrity: Via non-volatile RAM

Supply

Rechargeable battery: 11.1 Vdc Li-ion cells
Battery duration: 4 – 5 hours
Charging methods: Mains charger, 12 Vdc @ 2A

In-car charger

Power supply: 12 – 18Vdc
Power consumption: 3.5W @ 12V not charging, 15W @12V when charging

Download Datasheet: Pulsar’s Flow Pulse Handheld Controller

Reference : pulsar-pm.com