Pulsar Flow Pulse Handheld Controller is an indispensable tool for portable flow monitoring, offering a toolset that allows programming, monitoring and data acquisition. The unit is available to connect to pre-installed Flow Pulse sensors or as a self-contained kit, with instant feedback via its clear colour screen.
For true portability, the Handheld Controller will power a Flow Pulse directly, giving instant feedback on flow rate for a dynamic assessment of system or pump performance.
The Flow Pulse Handheld is available as a stand-alone unit to use with pre-existing Flow Pulse sensors, or can optionally be purchased as a complete kit with Flow Pulse and a compact and convenient carry case. Mains or battery operation, with in-car charger.
Pulsar Flow Pulse Handheld Controller Specifications
Physical
| Sensor body dimensions: |
210 x 125 x 50mm (8.27 x 4.92 x 1.97in) |
| Sensor body weight: |
Nominal 0.6kg (1.3lbs) |
| Enclosure material/description: |
Polycarbonate UL94 V2 rated, with weather-proof connectors |
| Screen: |
3.2” TFT LCD |
| Supplied cable length: |
2 metres (9.8ft) minimum |
Environmental
| Enclosure & connectors protection: |
IP65 |
| Max. and min. temperature (electronics): |
-20°C to +60°C (-4°F to +140°F) |
| Max. and min. temperature (battery charging): |
-20°C to +40°C (-4°F to +104°F) |
Approvals
| CE approval: |
Listed in the Certificate of Conformity within the manual |
Datalogging
| Storage media: |
Internal flash memory |
| Storage capacity: |
3.8GB, 3.2million entry without trace, 800,000 entries with trace |
| Storage format: |
PC files |
| Storage access: |
File transfer to PC via USB – no driver required |
Outputs
| Analogue output: |
Not available |
| Digital output: |
Half Duplex RS485 to sensor, USB connection to PC for file transfer |
Programming
| Programmed parameter integrity: |
Via non-volatile RAM |
Supply
| Rechargeable battery: |
11.1 Vdc Li-ion cells |
| Battery duration: |
4 – 5 hours |
| Charging methods: |
Mains charger, 12 Vdc @ 2A
In-car charger |
| Power supply: |
12 – 18Vdc |
| Power consumption: |
3.5W @ 12V not charging, 15W @12V when charging |
Download Datasheet: Pulsar’s Flow Pulse Handheld Controller
Reference: pulsar-pm.com
Related
You must be logged in to post a comment.