Disai DSU-2422-N(P) Dual Channel power Supply

Disai DSU-2422-N(P) Dual Channel power Supply

Disai DSU-2422-N(P) A power supply unit (or PSU) converts mains AC to low-voltage regulated DC power for the internal components of a computer. Modern personal computers universally use switched-mode power supplies. Some power supplies have a manual switch for selecting input voltage, while others automatically adapt to the mains voltage. Switched Mode Power Supplies, (often abbreviated to SMPS) are considerably more complex than the linear regulated power supplies. The main advantage of this added complexity is that switched-mode operation gives regulated DC supplies that can deliver more power for a given size, cost and weight of power unit.

Disai DSU-2422-N(P) Features

  • a universal two-channel supply unit with two independent power supplies 24VDC and relay outputs
  • for supplying arbitrary sensors with NPN (DSU-2422-N) or PNP (DSU-2422-P) output or “S” output (DSU-2422-N)
  • protection against short-circuit, current overload and overvoltage on both sections
  • safety requirements according to EN 61010-1
  • LED state indication
  • isolated switching contact outputs
  • mounting into an installation case or distribution cabinet on DIN rail 35 mm

Another Article:


Type DSU-2422-N(P)
Nominal supply voltage  230 V / 50 Hz
Allowed supply voltage tolerance  ± 10%
Nominal power demand 7 VA
Output voltage for sensor supplying  24 V DC
Output voltage tolerance  ± 5%
Input switch on current IQ (at UQ = 0 V) 10 mA
Max. output current for sensor supplying 50 mA
Output short-circuit current  80 mA
Contact rating:
max. current  4 A
max. voltage 250 V
max. power 500 VA
Max. switching frequency of loaded contact 360 / h
Contact life – number of cycles min. 105
Isolating voltage mains 230 V – output 24V  4 kV
Ambient temperature  -20 to + 50 °C
Protection rating:
enclosure IP 40
terminals IP 20
Housing material polycarbonate
Terminal material CuBe
Max. / recom. conductor cross-section  4 mm2 / 0,5 ÷ 1 mm2
Weight c. 0,4 kg
Připojení k síti 230 V pouze přes vypínač nebo jistič
Internal protection on 230VAC side – fuse T80 mA
The device meets the requirements of the following standards
Electrical safety requirements due to EN 61010-1
EMC EN 55022, EN 61000-4-2,-3,-4,-5,6,-11

Download Catalog: Power Supply and Switching 

Ref: Dinel.cz

%d bloggers like this: