Wenglor P1KE007 Through Beam Sensor

The through-beam sensor works with a fine laser beam as well as a transmitter and a receiver. The collimated laser beam of laser class 1 detects objects, for instance, when conducting installation, feed or presence controls, starting at a size of just 1.0 millimeters. The transmitter can be deactivated using test input in order to test the functionality of the through-beam sensor. The IO-Link interface can be used to configure the sensor (PNP/NPN, NC/NO, switching distance), as well as for reading out switching statuses and signal values.

Features at a Glance

IO-Link 1.1

Very high switching frequency

Test input for high operational reliability

Optical Data

Range	10,000 mm
Smallest Recognizable Part	see Table 1
Switching Hysteresis	< 10 %
Light Source	Laser (red)
Service Life (T = +25 °C)	100,000 h
Laser Class (EN 60825-1)	1
Max. Ambient Light	10,000 Lux

Electrical Data

Sensor Type	Receiver
Supply Voltage	10 … 30 V DC
Supply Voltage with IO-Link	18 … 30 V DC
Current Consumption (Ub = 24 V)	< 15 mA
Switching Frequency	4,500 Hz
Switching Frequency (interference-free mode)	2,000 Hz
Response Time	0.11 ms
Response time (interference-free mode)	0.25 ms
Temperature Drift (-10 °C < Tu < 40 °C)	10 % *
Temperature Range	-40 … 60 °C
Switching Output Voltage Drop	< 2 V
Switching Output/Switching Current	100 mA
Residual Current Switching Output	< 50 µA
Short Circuit Protection	yes
Reverse Polarity Protection	yes
Overload Protection	yes
Interface	IO-Link V1.1
Protection Class	III