The through-beam sensor works with a fine laser beam as well as a transmitter and a receiver. The collimated laser beam of laser class 1 detects objects, for instance, when conducting installation, feed or presence controls, starting at a size of just 1.0 millimeters. The transmitter can be deactivated using test input in order to test the functionality of the through-beam sensor. The IO-Link interface can be used to configure the sensor (PNP/NPN, NC/NO, switching distance), as well as for reading out switching statuses and signal values.
Features at a Glance
IO-Link 1.1
Very high switching frequency
Test input for high operational reliability
Optical Data
| Range | 10,000 mm |
| Smallest Recognizable Part | see Table 1 |
| Switching Hysteresis | < 10 % |
| Light Source | Laser (red) |
| Service Life (T = +25 °C) | 100,000 h |
| Laser Class (EN 60825-1) | 1 |
| Max. Ambient Light | 10,000 Lux |
Electrical Data
| Sensor Type | Receiver |
| Supply Voltage | 10 … 30 V DC |
| Supply Voltage with IO-Link | 18 … 30 V DC |
| Current Consumption (Ub = 24 V) | < 15 mA |
| Switching Frequency | 4,500 Hz |
| Switching Frequency (interference-free mode) | 2,000 Hz |
| Response Time | 0.11 ms |
| Response time (interference-free mode) | 0.25 ms |
| Temperature Drift (-10 °C < Tu < 40 °C) | 10 % * |
| Temperature Range | -40 … 60 °C |
| Switching Output Voltage Drop | < 2 V |
| Switching Output/Switching Current | 100 mA |
| Residual Current Switching Output | < 50 µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Interface | IO-Link V1.1 |
| Protection Class | III |
Mechanical Data
| Setting Method | Potentiometer |
| Housing Material | Plastic, ABS/PC |
| Degree of Protection | IP67/IP68 |
| Connection | M8 × 1; 3-pin |
| Optic Cover | Plastic, PMMA |
| Weight | 6 g |
Safety Relevant Data
| MTTFd (EN ISO 13849-1) | 1,945.13 a |
Output
| NPN NC | yes |
| IO-Link | yes |
Adjustable Parameters
| Output | Push-pull NPN PNP |
| Circuit | NC NC/NO NO |
| Other parameters | Off-delay On-delay Mode of operation Hysteresis Switching point |
For More Information and Price : Wenglor P1KE010 Through Beam Sensor
Read more articles :
- Asiantool A1H65PS NM Single Conductor
- Asiantool A1H50S Single Conductor
- Benefits of Werma – flexSQUARE
- Werma Heavy Duty Beacon and Traffic Lights
- Werma flatSIGN
You must be logged in to post a comment.