Wenglor P1KE012 Through-Beam Sensor is a precision-engineered laser receiver that utilizes Laser Class 1 technology to establish a high-accuracy light barrier for long-range detection up to 20 meters. Specifically designed as part of the P1K miniature series, the P1KE012 excels in identifying the smallest objects and exact edges by monitoring the direct interruption of a highly concentrated laser red light beam. With its ultra-compact housing and integrated IO-Link 1.1 interface, this sensor offers superior switching speeds and smart diagnostic capabilities, providing a robust solution for high-performance automation where space is limited and maximum precision is required.
Technical Specification of Wenglor P1KE012 Through Beam Sensor
Optical Data
| Range | 6,000 mm |
| Smallest Recognizable Part | see Table 1 |
| Switching Hysteresis | + 10 % |
| Light Source | Red Light |
| Service Life (T = +25 °C) | 100,000 h |
| Max. Ambient Light | 10,000 Lux |
Electrical Data
| Sensor Type | Receiver |
| Supply Voltage | 10 … 30 V DC |
| Supply Voltage with IO-Link | 18 … 30 V DC |
| Current Consumption (Ub = 24 V) | < 20 mA |
| Switching Frequency | 1,000 Hz |
| Switching Frequency (interference-free mode) | 500 Hz |
| Response Time | 0.5 ms |
| Response time (interference-free mode) | 1 ms |
| Temperature Drift | < 10 % |
| Temperature Range | -40 … 60 °C |
| Switching Output Voltage Drop | < 2 V |
| Switching Output/Switching Current | 100 mA |
| Residual Current Switching Output | < 50 µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Lockable | yes |
| Interface | IO-Link V1.1 |
| Protection Class | III |
Mechanical Data
| Setting Method | Potentiometer |
| Housing Material | Plastic, ABS/PC |
| Degree of Protection | IP67/IP68 |
| Connection | M8 × 1; 4-pin |
| Optic Cover | Plastic, PMMA |
| Weight | 6 g |
Safety Relevant Data
| MTTFd (EN ISO 13849-1) | 2,111.25 a |
Output
| PNP NC, PNP NO | yes |
| IO-Link | yes |
Adjustable Parameter
| Output | Push-pull NPN PNP |
| Circuit | NC NO NC+NO |
| Other parameters | Off-delay On-delay Mode of operation Hysteresis Switching point |
Features at a Glance
- Condition monitoring
- High light intensity with large switching reserve
- IO-Link 1.1
- Test input for high operational reliability
For More Information and Price : Wenglor P1KE012 Through Beam Sensor
Read more articles :
- Mitsubishi Electric 7011B Single Phase Ups
- Asiantool A1H90PS Single Conductor
- Asiantool A1H65S Single Conductor
- Asiantool A1H65S NM Single Conductor
- Asiantool A1H65PS Non-Mercury Slip Ring