Wenglor P1KT002 Reflex Sensor EnergeticIndonesia Industrial Parts

The reflex sensor makes use of a red light line in accordance with the energetic principle and is suitable for detecting objects without any background. It’s suitable for reliable detection of objects with stamped or perforated surfaces such as PCBs and perforated sheet metal. Furthermore, objects can be detected on the light line regardless of position. The IO-Link interface can be used to configure the reflex sensor (PNP/NPN, NC/NO, switching distance), as well as for reading out switching statuses and distance values.

Features at a Glance

Condition monitoring

Detection of objects with variable position

IO-Link 1.1

Red light line for perforated or stamped objects

Optical Data

Range	100 mm
Switching Hysteresis	< 10 %
Light Source	Red Light (Line)
Service Life (T = +25 °C)	100,000 h
Max. Ambient Light	10,000 Lux
Light Spot Diameter	see Table 1

Electrical Data

Supply Voltage	10 … 30 V DC
Supply Voltage with IO-Link	18 … 30 V DC
Current Consumption (Ub = 24 V)	< 20 mA
Switching Frequency	500 Hz
Switching frequency (speed mode)	750 Hz
Response time (speed mode)	0.67 ms
Response Time	1 ms
Temperature Drift	< 5 %
Temperature Range	-40 … 60 °C
Switching Output Voltage Drop	< 2 V
Switching Output/Switching Current	100 mA
Residual Current Switching Output	< 50 µA
Short Circuit Protection	yes
Reverse Polarity Protection	yes
Overload Protection	yes
Lockable	yes
Interface	IO-Link V1.1
Protection Class	III