The reflex sensor with background suppression works with red light according to the angle measurement principle and is suitable for the detection of objects against any background. The sensor always has the same switching distance, regardless of the color, shape and surface of the objects. Minimal height differences can be detected with the sensors and, for example, various parts can be reliably differentiated from each other. The IO-Link interface can be used to configure reflex sensors (PNP/NPN, NC/NO) and to output switching statuses.
Features at a Glance
Condition monitoring
Low switching distance deviation for black/white
IO-Link 1.1
Reliably detect objects against any background
Optical Data
| Range | 500 mm |
| Setting Range | 60 … 500 mm |
| Switching Hysteresis | < 5 % |
| Light Source | Red Light |
| Service Life (T = +25 °C) | 100,000 h |
| Max. Ambient Light | 10,000 Lux |
Electical Data
|
Mechanical Data
| Setting Method | Single-turn |
| Housing Material | Plastic, ABS/PC |
| Degree of Protection | IP67/IP68 |
| Connection | M12 × 1; 4-pin |
| Optic Cover | Plastic, PMMA |
| Weight | 30 g |
Safety Relevant Data
| MTTFd (EN ISO 13849-1) | 2,069.6 a |
Output
| PNP NC, PNP NO | yes |
| IO-Link | yes |
Adjustable Parameter
| Output | Push-pull NPN PNP |
| Circuit | NC NO inactive Error output NC+NO |
| Other parameters | Off-delay On-delay Mode of operation Hysteresis Switching point Emitted light |
For More Information and Price : Wenglor P1NH302 Reflex Sensor Background Suppression
Read more articles :
- Nanaboshi NCS 4410 PM Circular Connector
- Nanaboshi NCS 4016 P Circular Connector
- Nanaboshi NCS-4012-R Circular Connector
- Nanaboshi NCS-4012-P Circular Connector
- Nanaboshi NCS 4410 RF Circular Connector