Wenglor P1NH601 Reflex Sensor Background SuppressionIndonesia Industrial Parts

The reflex sensor with background suppression works with red light according to the angle measurement principle and is suitable for the detection of objects against any background. The sensor always has the same switching distance, regardless of the color, shape and surface of the objects. Minimal height differences can be detected with the sensors and, for example, various parts can be reliably differentiated from each other. The IO-Link interface can be used to configure reflex sensors (PNP/NPN, NC/NO) and to output switching statuses.

Features at a Glance

Condition monitoring

IO-Link 1.1

Reliably detect objects against any background

Large detection range

Optical Data

Range	1,200 mm
Setting Range	100 … 1,200 mm
Switching Hysteresis	< 10 %
Light Source	Red Light
Service Life (T = +25 °C)	100,000 h
Max. Ambient Light	10,000 Lux

Electrical Data

Supply Voltage	10 … 30 V DC
Supply Voltage with IO-Link	18 … 30 V DC
Current Consumption (Ub = 24 V)	< 30 mA
Switching Frequency	500 Hz
Switching Frequency (interference-free mode)	250 Hz
Response time (interference-free mode)	2 ms
Response Time	1 ms
Temperature Drift	< 10 %
Temperature Range	-40 … 60 °C
Switching Output Voltage Drop	< 2 V
Switching Output/Switching Current	100 mA
Short Circuit Protection	yes
Reverse Polarity Protection	yes
Overload Protection	yes
Interface	IO-Link V1.1
Protection Class	III