Description Of Wenglor P1PE102 Through Beam Sensor
The through-beam sensor works with red light as well as a transmitter and a receiver. Thanks to their high light intensity, the sensor provides a high degree of operational reliability even with interferences like steam, fog or dust. The transmitter can be deactivated using test input in order to test the functionality of the through-beam sensor. The IO-Link interface can be used to configure the sensor (PNP/NPN, NC/NO, switching distance), as well as for reading out switching statuses and signal values.
Features of Wenglor P1PE102 Through Beam Sensor
- Condition monitoring
- High light intensity with large switching reserve
- IO-Link 1.1
- Test input for high operational reliability
Optical Data
| Range | 20,000 mm |
| Smallest Recognizable Part | see Table 1 |
| Switching Hysteresis | 10 % |
| Light Source | Red Light |
| Service Life (T = +25 °C) | 100,000 h |
| Max. Ambient Light | 10,000 Lux |
Electrical Data
| Sensor Type | Receiver |
| Supply Voltage | 10 … 30 V DC |
| Supply Voltage with IO-Link | 18 … 30 V DC |
| Current Consumption (Ub = 24 V) | < 25 mA |
| Switching Frequency | 1,000 Hz |
| Switching Frequency (interference-free mode) | 500 Hz |
| Response Time | 0.5 ms |
| Response time (interference-free mode) | 1 ms |
| Temperature Drift | < 10 % |
| Temperature Range | -40 … 60 °C |
| Switching Output Voltage Drop | < 2 V |
| Switching Output/Switching Current | 100 mA |
| Residual Current Switching Output | < 50 µA |
| Short Circuit Protection | yes |
| Reverse Polarity Protection | yes |
| Overload Protection | yes |
| Interface | IO-Link V1.1 |
| Protection Class | III |
Mechanical Data
| Setting Method | Potentiometer |
| Housing Material | Plastic, ABS/PC |
| Degree of Protection | IP67/IP68 |
| Connection | M12 × 1; 4-pin |
| Optic Cover | Plastic, PMMA |
| Weight | 31 g |
Safety – Relevant Data
| MTTFd (EN ISO 13849-1) | 1,566.77 a |
Output
| NPN NC, NPN NO | yes |
| IO-Link | yes |
Adjustable Parameter
| Output | Push-pull NPN PNP |
| Circuit | inactive Error output NC NC+NO NO |
| Other parameters | Off-delay On-delay Mode of operation Hysteresis Switching point |
Application of Wenglor P1PE102 Through Beam Sensor
P1PE102 sensors are ideal for a variety of industrial applications, including:
- Pallet Presence Check in Cold Warehouses: Ensuring pallets are accurately detected in low temperature conditions.
- Overhang Monitoring in Pallet Warehouses: Detects overhangs to prevent damage or accidents.
- Wood Presence Check on Double Saws: Ensures wood is detected before the cutting process.
Specification of Wenglor P1PE102 Through Beam Sensor
- Detection Distance: Up to 20,000 mm.
- Light Source: Red light.
- Operating Voltage: 10 to 30 V DC.
- Current Consumption: Less than 25 mA at 24 V.
- Switching Frequency: 1,000 Hz.
- Response Time: 0.5 ms.
- Operating Temperature Range: -40 to 60°C.
- Housing Material: ABS/PC plastic with optical cover in PMMA plastic.
- Protection: Protection class IP67/IP68.
- Connections: M12 × 1; 4-pin.
- Weight: 31 g.
For More Information and Price : Wenglor P1PE102 Through Beam Sensor
Read More Articles :
- Wenglor T1FL06VD Reflex Sensor Energetic
- Nanaboshi NJC-165-RF Circular Connector
- Nanaboshi NJC-2012-RF Circular Connector
- Nanaboshi NJC-202-RM Circular Connector
- Nanaboshi NJC-2012-RM Circular Connector