The transmitter and receiver in these sensors are located in a single housing. The sensor evaluates transmitted light reflected back from the object. The output is switched as soon as an object passes the selected range. Bright objects reflect more light than dark objects, and can thus be recognized from greater distances.

Features at a Glance
- Compact housing
- Switching distance adjuster
- Large detection range
Optical Data
Range | 500 mm |
Switching Hysteresis | < 15 % |
Light Source | Infrared Light |
Wavelength | 850 nm |
Service Life (T = +25 °C) | 100,000 h |
Max. Ambient Light | 10,000 Lux |
Opening Angle | 12 ° |
Electrical Data
Supply Voltage | 10 … 30 V DC |
Current Consumption (Ub = 24 V) | < 40 mA |
Switching Frequency | 1 kHz |
Response Time | 500 µs |
Temperature Drift | < 10 % |
Temperature Range | -25 … 60 °C |
Switching Output Voltage Drop | < 2.5 V |
PNP Switching Output/Switching Current | 200 mA |
Residual Current Switching Output | < 50 µA |
Short Circuit Protection | yes |
Reverse Polarity Protection | yes |
Overload Protection | yes |
Protection Class | III |
Mechanical Data
Setting Method | Potentiometer |
Housing Material | Plastic, PBT |
Full Encapsulation | yes |
Degree of Protection | IP67 |
Connection | M12 × 1; 4-pin |
Weight | 25 g |
Safety Relevant Data
MTTFd (EN ISO 13849-1) | 2,779.93 a |
Output
PNP NC, PNP NO | yes |
Adjustable Parameter
Circuit | NC NC+NO NO |
For More Information and Price : Wenglor TM55PA2 Reflex Sensor Energetic
Read more articles :
- Elgo Compact Position Controller P85,P87,P88 Series
- Komax Heat Exchanger
- Komax Digester Heating
- Komax Desuperheater
- Komax Steam Heaters
You must be logged in to post a comment.