Bamo BAMOMATIC Electromagnetic Flow Meter

Bamo BAMOMATIC Electromagnetic Flow Meter

Bamo BAMOMATIC Electromagnetic Flow Meter  is a flow meter based on the principle of electromagnetic induction to measure flow-rate on electrically conductive liquids ( > 20 μS/cm). They are perfectly suited for dosing or totalizing liquids. Each instrument is calibrated on a bench test at ± 5 pulses for 1000 pulses (Water at 20 ° C). Density of the liquid, its temperature or its pressure have no influence on the measurement; No moving parts in this flow-meter: it ensures operatings without mechanical wear.

The measuring principle is based on Faraday’s law. In an electromagnetic flow-meter, the liquid section is in a magnetic field created by solenoid coils. Electrode sensors are on plane perpendicular to this field, in contact with the (conductive) liquid and allow measurement of the generated voltage. This voltage is directly proportional to the fluid velocity and therefore to the flow rate (for a constant flow section).

Bamo BAMOMATIC Features:

  • The most competitive on the market
  • Ranges from 0.25 l/min up to 150 l/min
  • Pulse output
  • Small dimensions

Application:

  • Mechanical and industrial engineering fields
  • Cleaning process
  • Liquid dosage
  • On board skids, etc.

Another Article:

Specification:

Power supply 24VDC/±3VDC
Consumption 20 mA / 0.65 W
Protection Against reverse polarity (diode)
Output signal NPN Type
Status indicators Red LED = power
Green LED = output pulses
Electrical connection DIN 43650-A plug
Fittings ½” ; ¾” ; 1” (according the model)
Nominal diameter 8, 14 or 18 mm (according the model)
Measuring tube material PVDF (Red housing)
Option: Delrin (Blue housing)
Electrodes AISI 316 L
Conductivity lower limit 20 μS/cm
Pressure limits 10 bar at 20 °C ; 8 bar at 40 °C ; 6 bar at 60 °C
Operating temperature -10 … +60 °C

Download Data Sheet: Electromagnetic Flow-Meter BAMOMATIC

Ref: Bamo.eu

Share
%d bloggers like this: