Bamo Paddle Flow Controller CDP

Bamo Paddle Flow Controller CDP

Paddle Flow Controller CDP
Paddle Flow Controller CDP

Bamo Measures Sas has been founded in 1978. Its capital is now 400 000 Euros. Since the beginning, the company has undergone a rapid development centring on industrial pH-meters and conductivity meters. Bamo is now well-known as a leader on the French market.

Since 1990, new developments in the Level Measure have given a new spring in the export. To its own production range, the company holds numerous agencies of foreign companies in Europe and all over the world. So we are offering a complete line with always the best possible service.

Bamo is a company that comes from France. This company selling some product. The product of Bamo such as pH and ORP; Chlorine, disinfection; Data processors; Conductivity; Water hardness; Turbidity; Oxygen; Level; Temperature; Flow; Pressure; Plastic valves; Metal valves.

Paddle Flow Controller CDP

The CDP operates a switch outside the liquid: The flow drives the paddle. A magnet on top of paddle actuates a Reed contact, located outside the fluid. The reverse movement of the paddle is generated by a leaf-spring. These controllers offer a simple, reliable and inexpensive solution for flow monitoring in pipelines. CDP controllers are mounted in-line, pipes up to ND 50 with a Tee, BSPF threads. For larger diameters, CDP must be mounted on-line, on an adaptor BSP ½” female thread.


  • The Reed contact has a low switching power:
    The use of a relay ES 2001 (doc. 250-02) will protect the Reed and allows a remote loop signal with greater breaking capacity on a change-over relay output (500 VA/ 250 V A / 5A – 1A/ 125 V DC/ 40 W).


  • 1 Reed contact N.O. / N.C.
  • Stainless steel or brass versions
  • Low pressure drop
  • Fittings: On tee up to ND50 or BSP ½”


Detection of presence or absence of flow of a liquid in a pipe under pressure. The liquid must be free of magnetic particles.

Another Article:


Body AISI 316 Ti
Seal FPM on stainless steel version
NBR on brass version
Temperature limit 110 °C
Ambient temperature 70 °C
Pressure limit 25 bar
Fittings DN 10 to DN 50: Tee with BSP female threads
ND 50 and larger: male thread BSP ½”
Contact output N.O. or N.C. according the Reed contact orientation
Switching power 230 V / 1.5 A / 80 W / 90 VA max.
Output cable PVC; 3-wire; 1 mm² ; 1.5 m long
Trigger point adjustment ±15 % of table values, horizontal pipe; See next page
Protection IP 65

Download Data Sheet: Paddle Flow Controller CDP