Dwyer P1 Series Brass Piston Flow SwitchIndonesia Industrial Parts

BRASS FLOW SWITCH

Fixed Set points, Flow Rates from 0.10 to 1.5 GPM

Dwyer P1 Series Shuttle or piston flow switches are sensors with an electrical contact output at a specific flow rate. Models are used with oil, air, water and gases. Applications include oil flow control, low flow detection in cooling lines, and high pressure lubrication systems.

Rugged construction and excellent chemical compatibility simplify flow/no flow detection. The Series P1 Brass Flow Switches utilizes a piston-type design for accurate detection of excessive or insufficient flow rates. The switches have preset actuation points from 0.10 to 1.5 GPM for liquid flow.

Dwyer P1 Series Features

Piston-type operation yields accurate detection of low flow rates
The piston magnetically actuates a hermetically sealed SPST reed switch

Application

Industrial cleaning equipment
Detecting loss of fluid in hydraulic systems
Assuring proper coolant flow in semiconductor processing

MODEL CHART

Model	*Actuation Set Point GPM (LPM)**
P1-011	0.10 (.38)
P1-012	0.25 (.95)
P1-013	0.50 (1.89)
P1-014	0.75 (2.84)
P1-015	1.00 (3.79)
P1-016	1.50 (5.68)

*Calibrated for water at standard conditions.

Dwyer P1 Series Specification

Service	Compatible liquids.
Wetted Materials	Housing: brass; Piston: polysulfone; Spring: 316SS; O-Ring: Fluoroelastomer, Other: Epoxy.
Temperature Limits	-20 to 225°F (-29 to 107°C).
Pressure Limits	1000 psig (68.9 bar).
Accuracy	±10% of set point.
Repeatability	±1%.
Switch Type	SPDT.
Electrical Rating	17 A @ 120 VAC, .08 A @ 240 VAC, .13 A @ 120 VDC, .06 A @ 240 VDC.
Electrical Connection	18 AWG, 24″ (60.96 cm), Polymeric lead wires.
Process Connection	1/4″ female NPT.
Mounting Orientation	Any position. Set points shown are based on vertical, inlet down position.
Required Filtration	50 microns or better.
Weight	0.66 lb (301 g).
Agency Approval	CE.