Bamo Flow Calculator for Open Channels BAMOPHAR 759

Flow Calculator for Open Channels BAMOPHAR 759
Flow Calculator for Open Channels BAMOPHAR 759

Bamo Measures Sas has been founded in 1978. Its capital is now 400 000 Euros. Since the beginning, the company has undergone a rapid development centring on industrial pH-meters and conductivity meters. Bamo is now well-known as a leader on the French market.

Since 1990, new developments in the Level Measure have given a new spring in the export. To its own production range, the company holds numerous agencies of foreign companies in Europe and all over the world. So we are offering a complete line with always the best possible service.

Bamo is a company that comes from France. This company selling some product. The product of Bamo such as pH and ORP; Chlorine, disinfection; Data processors; Conductivity; Water hardness; Turbidity; Oxygen; Level; Temperature; Flow; Pressure; Plastic valves; Metal valves.

Flow Calculator for Open Channels BAMOPHAR 759

The reading is easy on the 4.3″ color touch screen for flow-rate or height of liquid, as well as for totalization.
Through a user friendly menu, settings are easy for thresholds, alarms, sampler monitoring and all parameters.

Flow Calculator for Open Channels BAMOPHAR 759 converts the input signal directly into flow-rate, through a calculator and using formulas and calibration tables of our Venturi channels (ISO 4359) and our standard V or U channel weirs.

Extension terminal (panel, wall or DIN rail mounting):

  • Allows a second measurement (Turbidity, pH, Conductivity, etc.)
    Data from this blind unit are displayed on the main device
  • Connected to main unit with a 2×2-wire shielded cable
    (Cable length between both devices: max. 500 m)
  • Extension terminal uses the RS 422 and data logger of main unit

Features:

  • Color touch screen
  • Display of level, flow-rate, daily volume and totalization
  • Flow-rate tables for Venturi and weir plates
  • 1 Input 4-20mA and 1 input Pt 100 Ohm
  • 2 analogue outputs 0/4-20 mA
  • 4 programmable relay outputs; 2 as alarms, 1 for sampler, 1 for pulse output)
  • OPTIONS:
    • RS 422 /J-BUS + LOGGER
    • Extension terminal for a second measurement input

Main Features:

  • End-user interface: Color touch screen 4.3”, resolution 480×272 pixels
  • Display of: measurements, flow rate, temperature, height of liquid, daily volume and totalization, status of relays, settings – Configuration keyword protected
  • Flow-rate: (m³/h) – Resolution 0.1 m³/h – Volumes (m³) – Resolution 1 m³
  • Memorized flow-rate tables In memory for Venturi channels, weird plates in V or U
  • Sampler monitoring: S2 Set up on volume (m³)
  • Pulse output: S4 For external counter – 1 pulse/m³
  • Measurement outputs: 0/4-20 mA (max. 600 Ω)
  • Options: (RS 422 + Logger): Interface RS422 output, J-BUS link – Binary slave mode – 2400 to 9600 bauds; Data Logger Record of cycle average measurement – 150 000 records max. on memory card.

Another Article:

Specification:

End-user interface Color touch screen 4.3”, resolution 480×272 pixels
Display of measurements, flow rate, temperature, height of liquid, daily volume and totalization, status of relays
Settings – Configuration keyword protected
Measurement Scales Height of liquid (mm) – Resolution 1 mm
Flow-rate (m³/h) – Resolution 0.1 m³/h
Volume (m³) – Resolution 1 m³
Volumes and totalization Daily volume – on 8 digits – Reset to zero through the menu
Totalization – on 8 digits – No reset to zero
Measurement signals inputs 4-20 mA proportional to height of liquid
Temperature Pt 100 Ω sensor (-20 … 160 °C)
Memorized flow-rate tables In memory for Venturi channels, weird plates in V or U
Thresholds S1 and S3 2 contacts N.O., potential free, dedicated to flow-rate or temperature or to an external sensor.
Adjustable hysteresis from 0 to 100 % – Adjustable timer from 0 to 9999 s
Sampler monitoring S2 Set up on volume (m³)
1 contact N.O., potential free.
Adjustable timer (closed contact) from 0 to 9999 s
Pulse output S4 For external counter – 1 pulse/m³
1 contact N.O., potential free
Contact Initial resistance 100 mΩ max. (voltage drop 6 V DC 1 A)
Switching power 3 A, 277 V AC; 3 A, 30 V DC (nominal)
Switching capacity (min.) 100 mA, 5 V DC (variable according to switching frequency, ambient conditions, accuracy)
Measurement output 0/4-20 mA (max. 600 Ω) proportional to flow-rate – Programmable scale
Temperature ( °C )
Main power supply 230 V AC – 50/60 Hz (others on request) – Consumption 10 VA
Panel mounting, 96×144 mm; Front IP65; Rear IP40

Models

Wall mounting, IP65, with cable glands

OPTION (RS 422 + Logger)

Interface RS422 output, J-BUS link – Binary slave mode – 2400 to 9600 bauds
Data Logger Record of cycle average measurement – 150 000 records max. on memory card.

Download Data Sheet: Flow Calculator for Open Channels BAMOPHAR 759

Ref: bamo.eu