Kem Kupper ZHM ST Gear Flow Meters

The ZHM ST gear flow meter series ( tungsten carbide sleeve bearing design ) are flow meters which are mainly used in lubrication and non-lubrication liquids. They are equallysuitable for filled, viscous and abrasive media.

Only high-grade steels that even withstand corrosive liquids are used in the production of gear flow meters. Combined with the use of tungsten carbide bearings, the ZHM ST guarantees optimum measurement accuracy and a long service life under even the toughest application conditions.

The combination of various gear dimensions and modules allows a wide range of sizes that can cover a huge measuring range. This makes the ZHM ST ideal for a variety of applications in the field of metering as well as for monitoring, mixing and dosing.

Short response times, very dynamic performance and high measurement accuracy ensure accurate regulation and control of flow rates in demanding applications. For applications in hazardous areas, we offer intrinsically safe sensors and amplifiers with Ex protection in accordance with ATEX, IECEx, CSA and other standards. Additional certifications such as EAC (TR-CU) are available.

Features

Applications

  • Filling process
  • Dosing systems
  • 2-component and 3-component mixing plants
  • Test stands
  • Lubrication monitoring
  • Consumption measurement
  • Water-based paints, two component paints,highly filled metallic paints and Softfeel paints
  • Preservative waxes, adhesives, PVC, epoxy resins, filled and abrasive media
  • Polyol and isocyanate
  • Oils, grease
  • Hydraulic fluids and coolant
  • Fuels, additives of any kind

Features

  • High measuring accuracy up to ±0.1 %1)
  • Exceptional repeatability of ±0.05 %
  • Measuring range up to 1:400
  • Short response times
  • Pressure-resistant up to 420 bar [6,000 psi]
  • Medium temperature up to 180 °C [356 °F]
  • Robust construction and long lifetime
  • Applicable for electrostatic/ESTA applications

Specifications

Technical Data

  • Measuring Ranges: 0.005 up to 1,000 l/min
  • Measuring Accuracy: up to ±0.1 %
  • Repeatability: ±0.05 % (under the same conditions)
  • Linearity: ±0.5 % of actual flow (viscosity ≥ 30 mm²/s)
  • Materials:
    • Housing: as per DIN 1.4305 [AISI 303], 1.4404 [AISI 316L]
    • Gears: as per DIN 1.4122, 1.4501 [AISI F55]
    • Bearing: Tungsten carbide sleeve bearing
    • Seals: FKM, PTFE (others on request)
  • Pressure: up to 420 bar [6,000 psi]
  • Medium Temperature: -40 °C up to +180 °C [-40 °F up to +356 °F] (others on request)

Download Datasheet: ZHM ST Series Kem Kupper Gear Flow Meters

Reference: kem-kueppers.com

Share
%d bloggers like this: