Home
'
Indicator, and Control

Fluidwell D053 DIN Panel mount – Pressure Monitor

Description

The Fluidwell  D053 is a versatile, panel mount pressure indicator with a continuous pressure monitoring feature. It offers the facility to set one low-pressure and one high-pressure alarm value. If desired, an ignore function can be set up to allow for incorrect pressure for a certain period of time.

Fluidwell D053 DIN Panel mount - Pressure Monitor
Fluidwell D053 DIN Panel mount – Pressure Monitor

The Fluidwell  D-Series is a front panel mount indicator, controller and monitoring system for measurement applications in industrial environments. It is the robust alternative for your existing, not waterproof, panel meters.

Features

  • Displays actual pressure and alarm values.
  • Pressure: six large 17mm (0.67) digits.
  • Two-alarm values can be entered: low and high-pressure alarm.
  • Ambient temperature: -40°C to +80°C (-40°F to 176°F).
  • Selectable on-screen engineering units: mBar – Bar – PSI.
  • Aluminum DIN front panel of 144 x 72mm (5.67” x 2.83”) according to DIN 43700 / IEC 61554.
  • Red flashing LED backlight in case of a pressure alarm.
  • Various accessories are available for this product.
  • Large 17mm (0.67”) digits.
  • LED backlight option.
  • Ability to process (0)4-20mA or 0-10V DC signals.
  • One free configurable alarm output, available as passive signal, active signal or a robust, highly isolated (NO/NC) relay.
  • Power requirements: Input loop powered, battery powered or 8 – 30V DC, 24V AC and 115 – 230V AC.
  • Sensor supply: 8.2 / 12 / 24V DC.
  • Auto backup of settings and running totals.
  • Ambient temperature -40°C up to +80°C (-40°F up to 176°F).

Configuration

  • All configuration settings are accessed via a simple operator menu which can be password protected. Each setting is clearly indicated with an alphanumerical description, which avoids confusing abbreviations. Once familiar with one D-series product, you will be able to program all models in all series without a manual. All settings are safely stored in EEPROM memory in the event of sudden power failure.

Display

  • The Fluidwell  D053 display has large 17mm (0.67”) and 8mm (0.31”) digits which displays the pressure, measuring unit and alarm values. The display is a transflective type, which means that a high contrast reading is guaranteed, even in full sunlight. The D053 has a smart display update function incorporated. Related to the lower temperatures, the update frequency of the LCD is tuned automatically to achieve a readable display even at -40°C / -40°F

Backlight

  • The white backlight in combination with the D053 offers a unique feature: in case of a pressure alarm, the backlight can be set to be red or flashing red. The intensity can be adjusted in the configuration menu

Alarm output

  • One alarm output is available to transmit the pressure alarm. It can be set to switch for a low, high or both alarms! The output signal can be a passive NPN, active PNP or a robust, highly isolated electro-mechanical relay (NO/NC).

Power requirements

  • The basic power supply for the D053 is 8 – 30V DC. Several other power supplies are possible: With the 24V AC/DC and 115 – 230V AC power supplies, an 8.2 / 12 / 24V DC sensor supply is offered. For analog sensors, a 4 – 20mA input loop powered version is available. Finally we offer a long life lithium battery with a life expectancy that will last up to five years.

Signal input

  • The D053 does accept (0)4 – 20mA and 0 – 10V input signals from any type of pressure measurement device. The input signal type can be selected by the user in the configuration menu without having to adjust any sensitive mechanical dip-switches, jumpers or trimmers. Also a 4 – 20mA input loop powered model is available

Enclosures

  • The D053 is supplied in a unique, robust IP66, IP67 (NEMA Type4X) class panel mount front enclosure made of die cast aluminum, based on a popular DIN sized enclosure of 144 x 72mm. The front enclosure withstands powerful water jets and even total immersion.
  • The maximum thickness of the panel is 6mm (1/4”). The D-Series is the better alternative for your existing, not waterproof, front panel mounted indicators.

Advantages

  • Familiar easy operation with the Fluidwell “Know one, know them all” configuration structure, saving time, cost and aggravation.
  • Unique, robust IP66, IP67 (NEMA Type4X) panel mount front enclosure made of die-cast aluminum, allowing even big jets of water and total immersion.
  • Intuitive “Know one, know them all!” configuration menu, saving time, cost and aggravation.
  • Resistant to harsh weather conditions: rain, snow, salty atmospheres.
  • Only a few inches depth clearance for smaller, low cost panels and panel doors

Applications

  • The Fluidwell D053 fits in applications where continuous pressure measurement and monitoring is important.
  • The Fluidwell D-Series is a DIN-sized display and the better alternative for your existing, not waterproof, front panel mount indicators in extreme weather outdoor applications or e.g. in food industries where working environments are often cleaned with powerful water jets.

Specification

  • Display
    • Type High intensity reflective numeric and alphanumeric LCD, UV-resistant.
    • Dimensions 90 x 40mm (3.5” x 1.6”).
    • Digits Seven 17mm (0.67”) and eleven 8mm (0.31”) digits. Various symbols and measuring units.
    • Refresh rate User definable: fast, 1sec , 3sec, 15sec, 30sec, off.
    • Option ZB Transflective LCD with white LED-backlight. Red (flashing) backlight during alarm conditions.
    • Intensitiy and alarm response can be adjusted in the configuration menu.
  • Ambient temperature :  Safe areas -40°C to +80°C (-40°F to +176°F).
  • Power requirements
    • Type PB Long life Lithium battery – life-time depends upon settings and configuration – up to 5 years. (requires PL or PX)
    • Type PD 24V AC/DC ± 10%. Power consumption max. 10 Watt.
    • Type PL Input loop powered from sensor signal 4 – 20mA (requires type A)
    • Type PM 115 – 230V AC ± 10%. Power consumption max. 15 Watt.
    • Type PX 8 – 30V DC. Power consumption max. 0.3 Watt.
    • Type ZB 20 – 30V DC. Power consumption max. 1 Watt.
    • With type PD / PM: internally powered.
  • Sensor excitation
    • Type PB / PX Not available.
    • Type PD / PM Dipswitch adjustable sensor supply:
      • 8.2V DC, Iout max. 35mA @ 20°C.
      • 12V DC, Iout max. 50mA @ 20°C.
      • 24V DC, Iout max. 75mA @ 20°C.
      • (this voltage can vary depending on the input supply voltage)
    • Note Pd/ PM Total consumption of sensor, active output OH and backlight may not exceed 75mA @ 24V DC @ 20°C.
  • Directives & Standards
    • EMC Directive 2014/30/EU, FCC 47 CFR part 15.
    • Low voltage Directive 2014/35/EU
    • RoHS Directive 2011/65/EU
    • IP & NEMA EN 60529 & NEMA 250.
  • Data protection
    • Type EEPROM backup of all settings. Backup of running totals every minute. Data retention at least 10 years.
    • Password Configuration settings can be password protected.
  • Enclosure
    • Window Polycarbonate window.
    • Sealing Silicone.
    • Control keys Three industrial micro-switch keys. UV-resistant silicone keypad.
  • Panel mount enclosure
    • Dimensions 144 x 72 x 71.4mm (5.67” x 2.83” x 2.81”) – W x H x D according DIN 43700 / IEC 61554.
    • Panel cut-out 138 x 68mm (5.43” x 2.68”) L x H.
    • Material Die-cast aluminum front panel + GRP back enclosure.
    • Protection IP66, IP67 (NEMA Type4X) at the front-side.
    • Weight 325 gr.
    • Panel thickness Max. 6mm (1 /4”).
  • Signal output – Digital output
    • Function User defined: low, high or both alarms output.
    • Type OH
      • Active 24V DC transistor output (PNP); Load max. 75mA. Requires PD/PM.
      • Passive transistor output (NPN) – not isolated; Max. 24V DC – 300mA per output. Requires PD/PM
    • Type OR
      • Isolated electro-mechanical relay (NO/NC).
      • Requires PD/PM. Maximum resistive load: 2A @ 250V AC / 30V DC.
      • Maximum inductive load: 0.5A (pilot duty applications)
      • Note OR In case of inductive load, use RC snubbers.
    • Type OT
      • Passive transistor output (NPN) – not isolated.
      • Max. 50V DC – 300mA per output
  • Operator functions
    • Displayed info
      • Actual pressure.
      •  Low alarm value.
      • High alarm value.
      • Alarm values can be set as % (or only displayed).
  • Alarm values
    • Digits 7 digits.
    • Units According to the settings for pressure.
    • Decimals According to the settings for pressure.
    • Time units According to the settings for pressure.
    • Type of alarm Low and high pressure alarm. Includes alarm delay time and configurable alarm output
  • Communication
    • Modbus communication is available on F1-Series products.
    • HART communication is available with the F018 & E018 Flow rate Monitor / Totalizers.

Download Datasheet: Fluidwell D053 Pressure Monitor

Other Article:

Recent Posts

Top Posts & Pages

author

Rudy Wiratama

rudywinoto.com/wmablog.com/flowmasonic.com

Similar Posts