Fluidwell F110 Flow Rate Indicator/TotalizerIndonesia Industrial Parts

Description

The Fluidwell F110 Flow Rate Indicator/Totalizer is the most popular model in our range of flow rate indicators/ totalizers, complete with pulse and analog output signals. Even demanding applications are catered for with our base unit configuration. The display shows flow rate, total, and accumulated total. On-screen engineering units are easily configured from a comprehensive selection.

Fluidwell F110 Advantages

Robust aluminum or stainless steel 316L field enclosure (IP66, IP67 / NEMA Type4X).
It is so rugged, a truck can even stand on it!
Intrinsically Safe available – ATEX and IECEx approval for gas and dust applications.
Familiar easy operation with the Fluidwell “Know one, know them all” configuration structure, saving time, cost and aggravation.
Very diverse mounting possibilities: walls, pipes, panels, or directly onto outdoor sensors.

Features

Analog and pulse outputs.
Flow rate: seven 17mm (0.67″) or 8mm (0.31″) digits.
Displays total and flow rate simultaneously.
Separate engineering units for flow rate and total on the display.
Large digit selection for flow rate or total.
Total – resettable: seven 17mm (0.67″) digits.
LED backlight.
Accumulated total – not resettable: eleven 8mm (0.31″) digits.
The remote control input to reset total or to lock the “clear total” button.
Intrinsically safe according to ATEX and IECEx.
Ambient temperature: -40°C to +80°C (-40°F to 176°F).
GRP, Aluminum, or high-grade stainless steel enclosure.
Auto backup of settings and running totals in EEPROM memory.
Various accessories are available for this product.

Applications

Liquid flow measurement with mechanic flowmeters where a precise calculation over the full measurement range is required.
The F-Series is your first and best choice for field mount indicators in safe and hazardous area applications. Especially in harsh weather conditions like rain, snow, sandy deserts, salty atmospheres and temperatures between -40°C up to +80°C (-40°F up to 176°F).

Fluidwell F110 Specification

Signal Inputs

Flowmeter Inputs

Pulse-type inputs:
Reed-switch, NAMUR, NPN/PNP pulse, Sine wave (coil), active pulse signal.
(0)4 – 20mA.

Signal Outputs

Pulse outputs

Function: Scaled pulse output according to accumulated total (e.g. one pulse every 3.25 gallons).
Max. frequency: 500Hz.
Adjustable pulse length from 0.001 sec. to 9.999 seconds.
Type: One passive NPN transistor, active PNP transistor or isolated electro-mechanical relay.

Alarm outputs

None

Analog outputs

Function: Re-transmitting the flow rate – the output can be scaled to any range (e.g. 200 L/min to 1200 L/min).
Type: One passive isolated, floating, or loop powered 4 – 20mA output or one active (0)4 – 20mA or 0 – 10V DC output.

Supply

Power Supply

Long-life Lithium battery.
4 – 20mA, input Loop-powered.
8 – 24V AC/DC.
115 – 230V AC.
Basic: 8 – 30V DC.

Sensor Supply

3.2, 8.2, 12, 24V DC.

Hazardous Area

Intrinsically Safe

ATEX:
Gas: II 1 G Ex ia IIC T4 Ga
Dust: II 1 D Ex ia IIIC T100°C Da
IECEx:
Gas: Ex ia IIC T4 Ga
Dust: Ex ia IIIC T100°C Da
CSA:
I.S. Class I/II/III, Div 1, Grp A…G, T4 Class I, Zone 0, AEx ia IIC T4
FM:
I.S. Class I/II/III, Div 1, Grp A…G, T4 Class I, Zone 0, AEx ia IIC T4

Explosion Proof

ATEX:
Gas: II 2 G / Ex d IIB T5 Gb
Dust: II 2 D / Ex t IIIB T100°C Db

Communication

Modbus communication is available on F1-Series products.
HART communication is available with the F018 & E018 Flow rate Monitor / Totalizers.

Download Datasheet: Fluidwell F110Flow Rate/Totalizer Indicator

Other Article:

Fluidwell F110 Flow Rate Indicator/Totalizer

Description

Fluidwell F110 Advantages

Features

Applications