AccuLux lamps for Vehicle Equipment
You have to quickly find something in your car or in the glove compartment – and it is dark out. Normally the interior lighting of a vehicle is insufficient and a torch or hand lamp would be beneficial. AccuLux lamps with current LED technology, vehicle charge cable, or batteries, robust and impact-resistant, ensure the brightest light in the night.
Our advantages for vehicle outfitters:
- Robust and impact-resistant.
- Certified according to the ATEX directive 2014/34/EU.
- User-friendly and simple handling.
Acculux HL 25 EX Vechile Equipment
The microprocessor-controlled, rechargeable flexible head safety lamp, model HL 25 EX, made of impact-resistant, inflammable plastic was certified according to the ATEX directive 2014/34/EU and relevant EMC provisions and may be used in vehicles. The lamp is equipped with two switchable high-performance LEDs: a power LED with a focussed beam for far range and a 1-watt power LED with a wide emission for close range.
The environment-friendly lithium-ion battery without memory effect is secured against deep discharge and can be permanently charged through the intelligent circuit layout. This can be replaced by the user. The light can be used flexibly due to the 4-stage adjustable lamp head. The lamp can also be attached to protective clothing through a clamp.
The HL 25 EX can be operated in a permanent and blinking function and used as a warning light. The use as a lamp with an emergency light function is also possible and the customer can turn this off. The charging units for 100-230V AC, 12V DC, and 24V DC can be delivered from 1 to 5x. With a low weight of approximately 545 g, the HL 25 EX can be used with comparable hand lamps. It was designed in accordance with DIN 14649.
- replaceable lithium-ion rechargeable battery – from the operator
- LCD capacity display blinks while charging
- LCD capacity display backlit
- 4-stage adjustable lamp head
- Charging units 1 to 5x
- no change of the lamp required
- emergency light function can be turned off
- low weight, only approx. 545 g
Acculux HL 25 EX Specifications | Technical Data
| Artikel-Nr. Artikel-Nr. |
|
| Case material | inflammable plastic, shock-resistant |
| Lamp high beam | LED (with 170 lumen) |
| Operating time high beam | approx. 5 h |
| Protection class of the lamp | IP 67 |
| Range | approx. 200 m |
| Lamp close range | 1 watt LED (with 90 lumen) |
| Operating time close range | approx. 10 h |
| Rechargeable | Lithium-ion rechargeable battery 3.7 V, 5200 Ah |
| Charging voltage | 100-230V AC 50/60 Hz, 12V DC, 24 V DC |
| Weight of the lamp | approx. 540 g |
| Dimensions in mm | 225 x 70 x 70 |
| Explosion zone | 1, 2, 21 and 22 |
| Ex marking | II 2 G Ex ib IIC T4 Gb/ II 2D Ex ib IIIC T 135°C Db |
| ATEX no. | TÜV-A 10ATEX0006 |
Reference: acculux.eu
other Article:
- MCERTS Certified Systems (With a PMD)
- Pulsar Open Channel Flow Meter
- Litre Meter VFF Series
- LM GN Flow Meters Litre Meters Pelton Wheel Series
- Capacitive level sensors DLS–35, Dinel-Level and Flow Measurement