ABB Differential Pressure Transmitter (with remote diaphragm seal)
ABB Differential Pressure Transmitter 266DRH is a differential pressure transmitter suitable for measuring liquid, gas, or steam flow as well as level, pressure, and density characterized by the remote seal construction.
Thanks to the “All-Welded” technology inherited by Taylor in remote seal design and manufacturing, 266DRH can offer unmatched total performance and a wide selection of options such as fill fluid, diaphragm material, capillary protection, and mounting connections. ABB, the leader in severe process measurements, is able to provide the right solution for the most critical process media at extreme ambient and process conditions. The long-term stability and its proven reliability make 266DRH the best application solution for differential pressure measurements.
Replacement plug & play electronics with auto-configuration capability help in reducing maintenance time and costs. The Easy Set-up menu provides configuration and zero trim in minutes without the need for an expensive communicator. SIL2/SIL3 certification issued by TÜV Nord according to IEC 61508 represents another key-feature within the 266 pressure transmitter portfolio. This certification is a real guarantee of protection and makes 266DRH the smartest fit in Safety-critical loops.
266DRH features WirelessHART communication protocol allowing a shorter installation time by eliminating complex wired infrastructures, and lower overall implementation costs of process measurement. 266DRH battery life is about 10 years at 32 sec. update rates, delivering a very cost-effective and reliable solution to monitor your process assets.
266DRH: smartness beyond performances.
- Base accuracy: from ±0.06%
- Span limits: 4 to 16000kPa; 16inH2O to 2000psi
- Multiple protocol availability – provides integration with HART®, PROFIBUS PA, FOUNDATION Fieldbus and WirelessHART platforms offering interchangeability and transmitter upgrade capabilities
- Full compliance with PED Category III
ABB Differential Pressure Transmitter 266MRT (with remote diaphragm seals and multisensor technology)
ABB Differential Pressure Transmitter 266MRT is the top performance differential pressure transmitter with “multisensor technology” suitable for measuring liquid, gas, or steam flow as well as level, pressure, and density characterized by the remote seal construction. The unique combination of several sensor systems in a single device allows simultaneous measurement of differential pressure and absolute pressure. The sensor temperature and the absolute pressure are also used for eliminating environmental effects on the sensor.
Thanks to Taylor’s “All-Welded” technology in remote seal manufacturing as well as to the longstanding expertise, 266MRT can offer unmatched total performances and a wide selection of options such as fill fluid, diaphragm material, capillary protection, and mounting connections. ABB, the leader in severe process measurements, is able to provide the right solution for the most critical process media at extreme ambient and process conditions.
In addition to the plug-in terminal block, this transmitter features an in-field replaceable electronics module that thanks to the auto-configuration functionality dramatically improves plant productivity. Its intuitive plug-and-play display with an easy setup procedure really helps users by saving time and lowering maintenance and inventory costs. Moreover, the innovative TTG (Through The Glass) technology allows users to configure the instruments in the field without removing the windowed front cover and consequently to save a lot of time.
The 266MRT is certified by TUV NORD for use in safety instrumented systems as per the requirements of IEC61508. The transmitters meet the requirements for SIL2 applications in a single transmitter configuration (1oo1) and for SIL3 applications in a redundant configuration (1oo2).
Specifications | Technical Data
- Base accuracy: ± 0.04 %
- Span limits: 0.6 kPa … 10000 kPa; 2.41 in. H2O … 1450 psi
- Output signal: Multiple protocol availability offering interchangeability and transmitter upgrade capabilities
– 4 to 20 mA, HART
– PROFIBUS PA 3.01
– FOUNDATION Fieldbus ITK 5.1
- Local operation with LCD with TTG (Through The Glass) technology without the need of opening the housing
- Conforms to SIL2 / SIL3 acc. to IEC 61508
- Full compliance with PED Category III
Download Datasheet: 266DRH
Download Datasheet: 266MST