AccuLux SL 8 LED Set for Hazardous Areas

AccuLux lamps for hazardous areas

AccuLux SL 8 LED lamps from AccuLux offer diverse, safe, and reliable lighting. Whether as hand or helmet torches, working lamps with emergency light function, angle, or flexible head safety lamps, they are available for the explosion zones 0, 1, 2, 20, 21, and 22.

Our advantages for hazardous areas

All gases – zone 0, 1, 2, 20, 21 and 22
Certified according to the ATEX directive 2014/34/EU.
Battery and rechargeable lamps.

SL 8 LED Set

The case of the dust and splash-water protected safety lamp model AccuLux SL 8 LED is made of robust plastic. The lens optic of the power LED generates a strongly focussed light beam with a high range. Through the 110° flexible lamp head and the included orange diffusor, the lamp is flexible and can be used, for example, as a flashing warning lamp. High Tech-Accu-technology: The rechargeable, maintenance-free lithium-ferro-phosphate battery is secured against deep discharge and can be permanently charged through the intelligent circuit layout.

In case of low capacity: an automatic switch function from the power LED to the LED pilot lamps also is integrated. The lamp has a remaining capacity display through four LEDs on the back. The charging status is signaled by the light of the pilot lamp. The charging station L 5 with optimized charging technology in minimal dimensions guarantees assembly possibilities for the smallest spots in cars or buildings. The AccuLux SL 8 LED can be charged on 230 V AC as well as 24 V and 12 V DC. Safety emergency light function is present. For vehicles a charging station without an emergency function is available.

Another Article:

Supply: Lamp, Charging station, charging cable 230 V and 12/24 V, diffusor orange

dust and splash water protected
lens-focussed light beam with high range
robust plastic casing
flexible lamp head
extremely lightweight, ergonomic design
Emergency light function: turns on in case of blackout
automatic switch function from the power LED to the LED pilot lamp (in case of low capacity of battery)
4-stage charge level display
High-Tech: maintenance-free LiFePo battery

Specifications | Technical Data

Article No.	456741
Case material	Plastic
Main lamp	Power LED + focussed lens (ca. 200 lumens*)
Operating time main lamp	ca. 5 h
Operating time blink mode	ca. 8 h
Protection class oft he lamp	IP 54
Range	ca. 170 m*
Pilot lamp	LED 5 mm
Operating time pilot lamp	ca. 65 h
Battery	LIFePo4 3,2 V; Rechargeable
Charging voltage	230 V AC 50 / 60Hz, 12 / 24 V DC
Potection class	II
Weight oft he lamp	730 g
Dimensions in mm (Set)	104 x 245 x 120

*Luminous flux (lumen) or maximum range (meter) measured when turning on with a set of new batteries. These are average values that may deviate by +/- 10% due to component tolerances.

Reference: acculux.eu