bamo Flowmeter and flow-switch BV – BRIndonesia Industrial Parts

bamo Flowmeter and flow-switch BV – BR

BV-R : Reading + 1 switch.
B-R : blind + 1 switch.
Adjustable switch set-point.
Realised in brass or stainless steel.
Fluid : water.
Vertical mounting.
Range from 0,1 up to 150 l/mn of water.

Pressure and temperature bamo Flowmeter and flow-switch BV – BR

The flow monitors operate on the principle of the float type flow indicator. The float contains permanent magnets. The reed switch is mounted in an adjustable switch housing external to the flow circuit. The flowing medium raises the float in the direction of flow, as soon as the float with its permanent magnets reaches the set-point of the reed switch it will close the contact.
As the flow increases, the float rises further i.e. the contact remains closed and thus ensure bistable switching.

Descriptions bamo Flowmeter and flow-switch BV – BR

The flow monitor must be installed vertically in the flow circuit.
Flow direction is from bottom to top.
Flow media must be free of particle contamination, otherwise the instruments will not function properly. We recommend the use of dirt filters type SF or SFD.
The flow monitors must not be positioned in inductive fields. Minimum distance from iron parts : 10 mm.

Benefits & Features bamo Flowmeter and flow-switch BV – BR

Pressure:
10 bar BV-R
100 bar B-R and 300 bars B-R S.Steel

Drop pressure:
0,01 – 0,2 bar BV-R
0,02 – 0,4 bar B-R

Temperature max.: 100 °C (160°C FPM)
Float: Nickeled brass or S.Steel 316 Ti
Connection: Nickeled brass or S.Steel 316 Ti
Glass: Duran 50
Gasket: NBR
Body: Aluminium anodised
Accuracy: ± 5 % F. S.
Electrical connection: DIN 43650