West Control Solutions KS 50 -1 Single Loop Temperature Controller is intended for precise and cost-effective control tasks. The instrument provides simple 2-point (on/off) control, continuous PID control, or 3-point stepping control. The process value signal is connected via a universal input. A supplementary analog input can be used for heating current measurement or as an external set-point input.
The KS 50-1 has three process outputs that can be 3 relays or 2 relays plus a universal output. This universal output can be used for operating a solid-state relay, a continuous current/voltage output, or to energize a two-wire transmitter. Optionally,y there are two additional optocoupler outputs that can be used freely.
The controller is suitable for a number of industry applications, including:
- Furnaces and ovens
- Burners and boilers
- Plastics processing
- Hot runners
- Driers
- Climatic chambers
- Heat treatment plants
Specification KS 50 -1 Single Loop Temperature Controller
| Product Category: | Single Loop Controller |
| Dimensions and size: | 96m x 48mm x 118mm (HxWxD), 1/8 DIN |
| Connectors: | Pin or screw terminals |
| Primary Input Type: | Universal (TC, RTD, DC linear mA/mV) |
| Other Inputs: | External setpoint, Heating current monitoring |
| Output Type: | Relay, Logic, Continuous, Optocoupler |
| Max. Number of Outputs: | 3 |
| Scan Time: | 100 ms |
| Control Type: | 2-point (on/off), continuous PID control, or 3-point stepping |
| Number of Programmer Segments: | 10 |
| Power Supply: | 90-260 VAC, 20,4-26,4 VAC: Frequency 48-62 Hz, 18-31 V DC |
| Communications: | Modbus RS422/485 |
| Panel Sealing: | IP65 |
| Certifications: | CE, cULus, DIN EN 14597, GOST-R |
| Software Tools: | BlueControl |
Benefits & Features KS 50 -1 Single Loop Temperature Controller
- Universal continuous/switching version – for reduced stock
- 100 ms cycle time – suitable for fast control loops
- 20ms as shortest pulse – for very fast/strong actuators
- Freely configurable analog output, e.g., as process value output
- Customer-specific linearisation for all sensors
- Settings can be blocked via password and internal switch for high security
- Extended temperature range up to 60°C – allows mounting close to the process
- Easy 2-point or offset measurement correction
- Emergency operation after sensor break by means of the “output hold“ function
- Logical combination of digital outputs, e.g., for general alarm
- Programmer with 10 segments and “end“ signal
- RS 422/485 Modbus RTU interface
- Built-in transmitter power supply
- Two switchable parameter sets
- Self-Tune to setpoint without oscillation
- 3-point controller for water, fan, or oil cooling
- Start-up circuit boost functions
Source : www.west-cs.co.uk
Read More Articles :
- Cavotec MC 3300EX Radio Remote Control
- Cavotec MC 3200EX Radio Remote Control
- Contec Touch Panel-PC PT-S959SDHX Computer Series
- Encoder ENCO 08 Totalizer Index
- Cavotec MC 3-5EX Radio Remote Control