Pulsarpoint 200 Series is a vibrating level switch for bulk solid applications. When solids material comes into contact with the vibrating probe, the frequency of oscillation changes. This is detected and a signal generated to provide a changing relay output. May be used to signify a material level as being high, intermediate or low depending on configuration chosen.
The design of the thin blade profile and the frequency of oscillation ensure that the probe is able to resist material build up, often associated with tuning fork designs. This provides long, trouble free operation.
The Pulsarpoint 200 Series is suitable for most granular products with a bulk density of 20g/litre or more. A relay output is standard. The electronics are mounted in a diecast aluminium housing. The process connection and probe are in stainless steel. An adjustable sensitivity setting allows easy adjustment to suit the material being monitored.
- Bulk solids point level measurement
- Block chute detection
- Prevention of overflows, empty vessels, clogged or blocked conveyors
- Dry bulk solids from powder up to 20mm particle size
- Industries such as, food, animal feed, pharmaceutical, chemical, plastics, quarrying, power generation, cement and other bulk solids
- Products such as, flour, sugar, cellulose, coffee, sawdust, styrofoam, powdered milk, tea, ground glass, sand, grain, pellets and animal feed
Pulsarpoint 210 Series
|Power Supply:||20 to 250V AC/DC, 3VA (Ex ia version 18 to 23.7V DC provided by barrier unit)|
|Output:||1 volt free contact (DPDT) 8A @ 250VAC (Ex ia version 8 / 16mA depending on switching mode)|
|Sensor:||Stainless steel 1.4301 / AISI 304|
|Housing:||IP 66/67 Diecast aluminium|
|Temperature Frequency:||Process -20ºC to +80ºC (-4ºF to +176ºF), ambient 20ºC to 60ºC (+68ºF to +140ºF)|
|Application:||Minimum material density 20g/litre (1.25lb/ft3)|
|Maximum pressure in silo:||10 bar (145 psi)|
|Options:||DPDT, 24V or 48Vac, 24Vdc|
|Standard:||Standard length probe system (190mm insertion)|
|High Temperature Versions:||High temperature 150ºC (302ºF). Standard length probe (212) with insulating extensions OR with remote electronics (210). 2m (6.5ft) separation.|
|Welded Version:||Welded tube insertion up to 50cm (1.64ft) between probe tip and mounting thread|
|Cable Extension:||Flexible cable extension up to 20m (65ft) between probe tip and mounting thread|
|Threaded Version:||Threaded extension. Minimum 40cm insertion. Maximum 4m insertion|
Reference ; pulsar-pm.com