Bamo Measures Sas has been founded in 1978. Its capital is now 400 000 Euros. Since the beginning, the company has undergone a rapid development centring on industrial pH-meters and conductivity meters. Bamo is now well-known as a leader on the French market.
Since 1990, new developments in the Level Measure have given a new spring in the export. To its own production range, the company holds numerous agencies of foreign companies in Europe and all over the world. So we are offering a complete line with always the best possible service.
Bamo is a company that comes from France. This company selling some product. The product of Bamo such as pH and ORP; Chlorine, disinfection; Data processors; Conductivity; Water hardness; Turbidity; Oxygen; Level; Temperature; Flow; Pressure; Plastic valves; Metal valves.
Level Indicators and Controllers CF80 Series
Under the thrust of the fluid, the float transmits the level through a rod transmission to a vertical stem. The stem actuates a pointer on the dial, the contacts or/ and a potentiometer for output resistive signal image of the level. Gauge is mounted on the top of the tank.
Instrument is available in various versions according to requirements:
- Direct reading of level on top or/ and side of gauge head.
- 1 to 3 contacts (2 way contact), high and low levels and/ or pump automation
- Output for continuous resistive signal
The complete system is supplied ready to install and to use.
Models JE80, CF80 and JLD are designed for tanks with a height of 150 to 500 mm. Model JE80N is designed for tanks with a height of 150 to 650 mm.
- Height from 150 to 650 mm
- Fitting: BSP 2”, male
- Head housing: IP54
- 3 possible functions:
- Direct reading on dial
- With 1 to 3 contacts, potential free
- Output signal: continuous resistive signal (Ω)
These controllers for alarms on low, high levels, and transmitters of continuous level, are designed for indoor and small tanks.
- Diesel in tanks
- Lubricating oil
- Glycol water
Particularly suited for small storage tanks (150 to 650 mm high), e.g. on filling automation of tanks for diesel generators.
|Materials||Steel, Nylon, brass, stainless steel|
|Float: foamed PVC|
|Flange seal: Cork gasket|
|Fitting||BSP 2”, male|
|Head housing||IP 54|
|Dial||Above: Orange background; Graduations at 0, 1/2 and|
|Side: White background; Graduations at 0, 1/2 and 1|
|Operating temperature||From 0 to 40 °C|
|Low level alarm: 20 % capacity (Change-over contact, 10 A, 230 V, potential free)|
|High level alarm: 85 % capacity (Change-over contact, 10 A, 230 V, potential free)|
|Filling function: ON at 40 % and OFF at 80 % capacity (2-way contact, 10 A, 230 V, potential free)|
|On request: Factory setting between 20 and 85 % capacity.|
|Output, resistive signal||From 0 to 160 Ω (approx., ±15 %)|
Download Data Sheet: Level Indicators and Controllers CF80 Series