Bamo CF80 Series Level Indicators and Controllers

Bamo CF80 Series Level Indicators and Controllers Under the thrust of the fluid, the float transmits the level through a rod transmission to a vertical stem. The stem actuates a pointer on the dial, the contacts, or/ and a potentiometer for output resistive signal image of the level. Gauge is mounted on the top of the tank.

The instrument is available in various versions according to requirements:

Direct reading of level on top or/ and side of gauge head.
1 to 3 contacts (2-way contact), high and low levels, and/ or pump automation
Output for continuous resistive signal

The complete system is supplied ready to install and to use. Models JE80, CF80, and JLD are designed for tanks with a height of 150 to 500 mm. Model JE80N is designed for tanks with a height of 150 to 650 mm.

Bamo CF80 Features

Height from 150 to 650 mm
Fitting: BSP 2”, male
Head housing: IP54
3 possible functions:
- Direct reading on dial
- With 1 to 3 contacts, potential free
- Output signal: continuous resistive signal (Ω)

Application

These controllers for alarms on low, high levels, and transmitters of continuous level, are designed for indoor and small tanks.

Diesel in tanks
Day-tanks
Lubricating oil
Glycol water
Rainwater

Particularly suited for small storage tanks (150 to 650 mm high), e.g. on filling automation of tanks for diesel generators.

Bamo CF80 Specification

Materials	Steel, Nylon, brass, stainless steel
	Float: foamed PVC
	Flange seal: Cork gasket
Fitting	BSP 2”, male
Head housing	IP 54
Dial	Above: Orange background; Graduations at 0, 1/2 and 1 (fig1.)
Dial	Side: White background; Graduations at 0, 1/2 and 1 (fig.2)
Operating pressure	Atmospheric
Operating temperature	From 0 to 40 °C
Contacts	Default setting:
	Low level alarm: 20 % capacity (Change-over contact, 10 A, 230 V, potential free)
	High level alarm: 85 % capacity (Change-over contact, 10 A, 230 V, potential free)
	Filling function: ON at 40 % and OFF at 80 % capacity (2-way contact, 10 A, 230 V, potential free)
	On request: Factory setting between 20 and 85 % capacity.
Output, resistive signal	From 0 to 160 Ω (approx., ±15 %)