Alicat CODA Coriolis Mass Flow Pump Controller easily integrates into your existing liquid pump setup and enables full automation without needing a separate PID controller. Precision accuracy up to ±0.2% of reading. You get mass flow and volumetric flow precisely measured, by using pressure from a pump you supply, controlled by the CODA meter.
Specifications of Alicat CODA Coriolis Mass Flow Pump Controller
CODA KF-Series performance
- Full scale ranges: 40 g/h to 300 kg/h
- Measures and controls mass or volumetric flow
- Steady state control range: 5%–100% of full scale
- Accuracy calibration, NIST-traceable (liquid): ±0.6% of reading or ±0.2 of full scale, whichever is greater
- Repeatability: ±0.1% of full scale
- Response time:
- 40–10,000 g/h: <140 ms (T63), pump-dependent, user-adjustable
- 30–300 kg/h: <200 ms (T63), pump-dependent, user-adjustable
- Density accuracy ±5 kg/m3
CODA KF-Series operating conditions
- Operating temperature: -35 to 70°C
- Proof pressure: 1500 PSIA (103.4 barA); optional 4,000 PSIA (275.8 barA) for ?100 g/h instruments
Features of Alicat CODA Coriolis Mass Flow Pump Controller
- Adding your pump produces liquid flow in situations where you don’t have a pressurized source.
- Measure and control true mass flow, even when fluid composition is changing or unknown.
- Batching and dosing built-in: deliver a precise preset amount of fluid, then stop flowing.
- Works with your pump (check with us for suitability).
- Measures densities from 100 to 2,000 kg/m3
- Insensitive to external vibrations to mitigate process disturbances.
- With high accuracy option, you can mix at ultra-low flows.
- FlowVision software
Device Range
Full-scale flow rates range from 1 kg/h to 100 kg/h with controllable ranges of 2% to 100% of full scale.
- To learn about additional custom flow ranges, please contact Alicat. Highest possible accuracy and responsiveness with custom ranging—included with every system.
- For specs on all devices
Build and Performance
- Communication: ASCII and Modbus RTU over RS-232 or RS-485
- Wetted materials: 316L stainless steel and FKM; nickel alloy and FFKM optional. Consult Alicat for additional wetted materials options.
- Ingress protection: IP40 or IP67
Source: www.alicat.com
Read More Articles :
- Alicat Standard CODA Coriolis Mass Flow Meters
- Alicat CODA KC–Series Coriolis Mass Flow Meter
- Alicat CODA Coriolis Mass Flow Pump System
- Flow Meter Coriolis mass flow untuk Crude Palm Oil
- Coriolis Mass Flow Sensor Rheonik RHM80
You must be logged in to post a comment.