Alicat MC-Series Gas Mass Flow Controllers Beloved by metrology departments, cherished by researchers and depended on by systems engineers – the MC-Series does more, and does it faster.
Features of Alicat MC-Series Gas Mass Flow Controllers
- Full-scale flow rates between 0.5 SCCM and 5000 SLPM for all gases (10,000 SLPM for H2)
- Monitor four variables: mass flow, volumetric flow, pressure, and temperature
- Control one of three variables: mass flow, volumetric flow, or pressure
- 98+ gas calibrations preloaded and user-selectable
- Local, analog, or digital control, including industrial protocols
Specifications of Alicat MC-Series Gas Mass Flow Controllers
- Steady-state control range: 0.01% – 100% of full scale
- NIST-traceable calibration
- Standard accuracy: ±0.6% of reading or ±0.1% of full scale, whichever is greater
- High accuracy: ±0.5% of reading or ±0.1% of full scale, whichever is greater
- Repeatability: ±(0.1% of reading + 0.02% of full scale)
- Typical control response time: as fast as 30 ms
- Warm-up time: <1 s
Operating conditions
- Compatible gases: 98+ pure and mixed non-corrosive gases
- Operating temperature: –10°C to +60°C
- Full-scale operating pressure: 160 PSIA (11 barA)
Build and performance options
- Communication protocol: Analog (4-20 mA, 0-10 Vdc, 0-5 Vdc, or 1-5 Vdc), RS–232, RS–485, DeviceNet, EtherCAT, EtherNet/IP, Modbus RTU or TCP/IP, PROFIBUS, PROFINET
- Display: Backlit monochrome or TFT color; integrated or panel–mount
- Process connections: NPT, SAE, AN, BSPP/G, compression, VCR, or VCO fittings
- Elastomers: Viton, FFKM, EPDM, Silicone
- Calibration: Standard, high-accuracy; custom calibration points
- Ingress Protection: IP40, IP66, IP67
- Hazardous Environment Rating: CSA Class 1 Div 2, ATEX Class 1 Zone 2
Included with all MC-Series
- Setpoint ramping and limits: Control your process as fast or slow as desired with ramp rates. Protect your process from inadvertent setpoint changes with setpoint limits.
- Valve close and valve open override: Quickly stop all flow or vent your system as needed with alarms.
- Totalizers and batch control: Track total flow every 1 ms or dispense precise volumes with our integrated totalizers.
Source: www.alicat.com
Read More Articles :
- Alicat MS–Series Anti-Corrosive Mass Flow Meters
- Alicat MQ–Series High Pressure Mass Flow Meters
- Alicat Bio-series Mass Flow Meters for Bioreactors and Fermenters
- Alicat M–Series Mass Flow Meters
- Alicat CODA Coriolis Mass Flow Pump Controller
You must be logged in to post a comment.