Alicat MCQ-Series High Pressure Gas Mass Flow ControllersIndonesia Industrial Parts

Alicat MCQ-Series High-Pressure Gas Mass Flow Controllers rapidly reach setpoints and maintain stable control of mass flow, volumetric flow, or pressure for operating pressures up to 320 PSIA.

Features of Alicat MCQ-Series High-Pressure Gas Mass Flow Controllers

Versatile & accurate. Real-time control of flows up to 320 PSIA with NIST-traceable accuracy to ±0.6% of reading or ±0.1% of full scale for 98+ gases and 20 custom-defined mixtures.
Fast control, multivariate data. Millisecond-response times immediately upon powering up, to control either mass flow, volumetric flow, or pressure and display instantaneous flow, pressure, and temperature readings, in your choice of engineering units.
Easy integration. Custom process ports and electrical connectors, and your choice of EtherNet/IP, EtherCAT, DeviceNet, PROFIBUS, PROFINET, Modbus (RTU and TCP/IP), or serial communications for easy integration into your industrial process.

MCQ-Series performance

Available full-scale ranges: 10 SCCM to 5000 SLPM for all gases (10,000 SLPM for H2)
Steady-state control range: 0.5% – 100% of full scale
Standard accuracy calibration, NIST–traceable: ±0.6% of reading or ±0.1% of full scale, whichever is greater
Repeatability: ±0.1% of full scale
Typical control response time: as low as 100 ms
Warm-up time: <1 s

MCQ-Series operating conditions

Compatible gases: 98 pre–loaded selectable gas calibrations; additional mixtures definable with COMPOSER™
Operating temperature: –10°C to +60°C
Full scale operating pressure: 320 PSIA
Max differential pressure: 75 PSID
Proof pressure: 400 PSIA
User selectable reference conditions (defaults): 25°C & 1 ATM (STP) and 0°C & 1 ATM (NTP)

Device Range of Alicat MCQ-Series High Pressure Gas Mass Flow Controllers

Alicat offers high-pressure controllers with custom flow ranges from 10 SCCM full scale to 10,000 SLPM full scale, each with a control range of 0.5% to 100% of full scale. Custom devices are ranged to best meet your specific application needs for full-scale flow rate and operating range.

Devices are custom ranged from 10 SCCM full scale to 10,000 SLPM full scale with controllable ranges of 0.5% to 100% of full scale.

For specs on devices ranging from 10 SCCM full scale to 20 SLPM full scale
For specs on devices ranging from 50 SLPM full scale to 5,000 SLPM full scale

Included with each device

Multi-variable process measurements: Simultaneously measure mass flow, volumetric flow, gas pressure, and gas temperature.
User changeable units of measurement: Change the unit of measurement for pressure, flow, or temperature from our extensive list of engineering units.
Gas selectability: Select your process gas from any of the 98+ preloaded NIST-traceable gas calibrations in our gas list.
Gas Select COMPOSER™: Define 20 custom gas mixtures of up to 5 constituent gases using our Gas Select Composer™ firmware.
Monochrome backlit LCD with integrated touchpad: Easily read measurements using the backlit display and control configurations with the user-friendly integrated touchpad.
User-adjustable setpoint ramping & limits: Configurable ramp rates allow the process variable to be controlled as fast or as slow as desired, and configurable setpoint limits protect processes from inadvertent setpoint changes.
User-adjustable standard temperature and pressure (STP) conditions: Quickly change reference conditions without the need for recalibration.
Valve close override and valve open override: Utilize alarms to quickly vent your system or stop all flow as needed.

Source: www.alicat.com

Read More Articles :