Alicat CODA Coriolis Mass Flow Pump SystemIndonesia Industrial Parts

General

Alicat CODA Coriolis Mass Flow Pump System there is no need to source a pump and meter or develop a control system. This fully integrated system is compatible with a wide range of liquids from 1 kg/h to 100 kg/h full scale with precision accuracy of ±0.2% of reading. You get mass flow and volumetric flow precisely measured, by supplying pressure from the pump.

Specifications of Alicat CODA Coriolis Mass Flow Pump System

Highest possible accuracy and responsiveness with custom ranging — included with every system.

CODA KG-Series performance

Full scale ranges: 1 kg/h to 100 kg/h
Measures and controls mass or volumetric flow
Steady state control range: 2%–100% of full scale
Accuracy calibration, NIST-traceable (liquid): ±0.2% of reading or ±0.05 of full scale, whichever is greater
Repeatability: ±0.05% of reading or ±0.025% of full scale, whichever is greater
Control response time:
1–10 kg/h: <1500 ms (T63)
30–100 kg/h: <1500 ms (T63)
Operating temperature: -35 to 70°C
Density accuracy ±5 kg/cubic meter

Features

Measure and control true mass flow, even when the fluid composition is changing or unknown.
Batching and dosing built-in: deliver a precise preset amount of fluid, then stop flowing.
The integrated pump produces liquid flow in situations where you don’t have a pressurized source.
The bypass valve increases the turndown ratio and stabilizes the flow
Measures densities from 100 to 2,000 kg/m3
Insensitive to external vibrations to mitigate process disturbances.
With a high accuracy option, you can mix at ultra-low flows.

Device Range

Full-scale flow rates range from 1 kg/h to 100 kg/h with controllable ranges of 2% to 100% of full scale.

To learn about additional custom flow ranges, please contact Alicat. Highest possible accuracy and responsiveness with custom ranging—included with every system.
For specs on all devices,

Build and Performances

Communication: ASCII and Modbus RTU over RS-232 or RS-485
Wetted materials: 316L stainless steel, PEEK, and FKM standard; nickel alloy and FFKM optional. Consult Alicat for additional wetted materials options.
Ingress protection: IP40

Source: www.alicat.com

Read More Articles :