General Information
AW-Lake Phosphate Ester Flow Meter is a Variable Area Flow Meter offering a low cost alternative for measuring heavier, solvent-based materials and lubricants. The superior weather-tight construction of this flow meter allows for use in outdoor environments and where wash-downs are required. By using a Pyrex® tube and special seals, this meter is compatible with more aggressive fluids. The standard selection of NPT, SAE, and BSPP ports reduce the number of adapters needed for an easy installation.
Phosphate Ester Flow Meter is compatible with aviation lubricants such as Skydrol®, and fire-retardant fluids such as Pydraul®, Fyrquil® and Houghton 900 series. Meters are density corrected to 1.145 sg.
AW-Lake Phosphate Ester Flow Meter Advantages:
- Choice of Materials: Select from aluminum, brass or stainless steel to meet system and liquid requirements.
- Unrestricted Mounting: Allows for horizontal, vertical or inverted installation and does not require straight plumbing on inlet or outlet.
- Multi-Use: Factory calibrated for phosphate esters, these versatile meters can be used to verify hydraulic power unit outputs, as well as test machinery and tools for proper fluid flow rates.
- Rugged and Reliable: These meters are constructed with all metal pressure vessels that allow safe & permanent installation.
- High Pressure Operation: The magnetically coupled follower design allows operation to 6000 PSIG and use with liquids.
- Multiple Ports Available: Standard selection of NPT, SAE and BSPP ports reduces the amount of adapters required for installation.
Features:
- Measuring Accuracy: ±2.0% of full scale
- Flow Measuring Range: 0.1-130 GPM (0.5 – 500 LPM)
- Maximum Operating Pressure: Aluminum and brass meters: 3500 PSIG (240 Bar) Stainless steel meters: 6000 PSIG (410 Bar)
- Maximum Operating Temperature: 240°F (116°C)
AW-Lake Phosphate Ester Flow Meter Specification:
- Measuring Accuracy: ±2.0% of full scale
- Repeatability: ±1% of full scale
- Flow Measuring Range: 0.1-130 GPM (0.5-500 LPM)
- Maximum Operating Pressure: Aluminum and brass meters: 3500 PSIG (240 Bar), Stainless steel meters: 6000 PSIG (410 Bar)
- Maximum Operating Temperature: 240°F (116°C)
- Standard Calibration Fluids:
- Tap water @ 70°F (21°C) 1.0 s.g.
- Meters are density corrected to 1.145 sg
- Filtration Requirement: 74 micron filter or 200 mesh screen minimum
- Material Of Construction (Non-Wetted Components):
- Window Tube: Pyrex®
- Window Seals: PTFE
- Material Of Construction (Wetted Components):
- Casing & End Ports: Anodized Aluminum, Brass, or Stainless Steel
- Seals: EPR, w/ PTFE backup, FKM or FFKM optional
- Transfer Magnet: PTFE coated Alnico
- All other internal parts: Stainless steel
Download Data Sheet: Phosphate Ester Flow Meter
Ref: aw-lake.com
Another Article: