Description
Bamo Vortex Flow Sensor, which has no moving mechanical parts, is not affected by pollution. It is distinguished by a low pressure drop and good accuracy. The flow sensor is based on the principle of Karman vortex trail. The frequency of vortices generated by the obstacle located in the flow path is proportional to the flow speed. Turbulence is detected by a piezoelectric paddle operated by integrated electronics.
Bamo Vortex Flow Sensor Features:
- Flow-rate sensor for domestic hot water, drinkable water, demineralized water
- Measuring range from 0.9 to 150 l/min
- Pipes from ND 8 to ND 25 mm
- Output signal: or 4-20 mA or pulses
- Drinkable water approvals: WRAS, ACS
Application:
Flow measurement on domestic hot water, drinkable water, or non-conductive liquids such as demineralized water or reverse osmosis water.
Bamo Vortex Flow Sensor Specification:
| Measuring range | From 0.9 up to 150 l/min Flow-rate < 50% F.S.: ± 1% F.S. |
| Accuracy | Flow-rate > 50% F.S.: ± 2 % |
| Response time | F.S. Analogue output: < 500 ms Frequency output: < 5 ms |
| Operating conditions: | |
| Liquids | Domestic hot water, potable water, demineralized water < 125 |
| Liquid temperature limit | °C |
| Ambient temperature limits | -15 … +85 °C |
| Storage temperature | -30 … +85 °C |
| Pressure limits vs. Temperature | Max. 12 bar at 40 °C / Max. 6 bar at 100 °C (Max. test pressure is 18 bar at 40 °C) |
| Cavitation | Respect the following relation to prevent cavitations |
| [ Outlet Pabs. / Differential pressure ] > 5.5 | |
| Wet parts FDA compliant: | ETFE |
| Sensor paddle | |
| Body with damming insert | PA6T/6I (40 % FV) |
| Sealing | EPDM peroxide (FPM on request) |
Download Data Sheet: Flow sensor, Vortex type VORTEX
Ref: bamo.eu
Another Article:
- ONICON- F 2600 Series Inline Vortex Flow Meter For Water & Steam
- Small Vortex Flow Meter For Liquids Kofloc
- Steam Flow Meter Alia
- Vortex Flow Meter
- Gas Vortex Flow Meter