Ultrasonic Gas Flow Meter Xonic 10G by Jain Technology
Ultrasonic Gas Flow Meter Like Xonic-10G Ultrasonic Flowmeter uses Ultrasonic Transit-Time Technology, it shows superior performance than the conventional pressure gas flow meter. Depends on pipe size, it uses one path or three path ultrasonic sensor(s), and the temperature sensor is embedded for volume compensation.
Xonic-10G Ultrasonic Flowmeter uses Ultrasonic Transit-Time Technology, it shows superior performance than the existing pressure GFM. Depends on pipe diameter size, it uses one path or three paths ultrasonic sensor(s), and the temperature sensor is embedded to give compensation volume. Xonic-10G is developed as the first ultrasonic type gas flow meter in Korea.
Characteristic:
- 01 m/s Measuring low flow rates
- Wide measuring range 200:1
- No moving parts
- pressure loss control
- Easy installation and maintenance
- 2 Cross paths measurement
- Temperature sensor, and the volume compensation
Application:
- Natural Gas
- Flare Gas
- COG Gas
- Bio Gas
- Vapor Gas
- Fuel Gas
- Vent Gas
Field of Application:
- Natural Gas Flowmeter
- AIR Supply Lines
- Combustion Gas
- Tunnel Air Flow Control
Ultrasonic Gas Flow Meter Xonic 10G Features
Outstanding Performance
Xonic-10G demonstrates higher and more accurate velocity measurement range compared to the existing mechanical. Direct Command Flow maintains 1% of accuracy, minimum versus maximum flow rates is 200 times over.
Digital Signal Processing
To have accurate analysis of the ultrasonic signal, DSP advanced technique is used to calculate the time lag according to the flow velocity. In worst noise, it consecutively maintains high accuracy by detecting clear signal.
Self-Diagnostic /Test Function
In the field, flowmeter operational status could be checked through Xonic-10G graphic LCD panel. In particular, with a simple manipulation, the oscilloscope ultrasonic signal function makes it possible to determine the operational status gauge in the field.
Ultrasonic Gas Flow Meter Xonic 10G Specifications
General Specification | ||
| Measurement method | ultrasonic transit-time difference | |
| Velocity Measurement | -30 m/s ~ 30 m/sec | |
| Minimum Velocity | 0.01 m/s | |
| Display | Flow (Instant Flow, standard, mass), Total Flow, Velocity | |
| Accuracy (Reading) | 0.5% | |
| Reproducibility | 0.25% | |
| Diagnostic Function | the shape of the ultrasonic signal, value gain, ?T, FFT | |
| Measuring Gas Type | natural gas, gas, AIR, combustion gas | |
| Converter | ||
| Temperature | -20 ~ +60? | |
| Explosion Proof | IECEx | Ex d II C |
| In / Output | Relays | Normally open |
| Analog Cut | 4-20mA | |
| Analog In | 4-20mA | |
| Communication | RS-232C, RS-485 MobBus | |
| Power | 12~24VDC | |
| Flange / Transducer | ||
| Flange Range | 50 ~ 300mm flange type | |
| Material | Stainless 304 | |
| Temperature | -20 ~ +80? | |
| Working Pressure | 20 bar below | |
| Temperature Sensor | 500? 4 wire, -40 ~ +120? | |
Download Catalog : Inline Gas Flowmeter (Xonic 10G)
Read More:
- Jain Xonic 100P Portable Ultrasonic Flow Meter
- Xonic 100L Jain Clamp On Ultrasonic Flow Meter
- Flow Meter Electromagnetic Air Limbah Flowma WMAG30
- UltraFlo™ UFDD Digital Doppler Clamp-On Flow Meter
- PDFlo™ PDFOP Flocorp Fiber Optic Sensor
- Heinrichs BGF Variable Area Flow Meter
- Heinrichs KDS-R Variable Area Flow Meter
