Kofloc 3660 Series Mass Flow Controller has been developed centering the focus on compactness and low cost and is being acclaimed by a wide range of users for diverse applications, including from laboratory research and development activities to the user as a standard mass flow control model for various types of analyzers and vacuum devices in the production line. Varieties of derived models and options are available.
Kofloc 3660 Series Feature
- High reliability ensured using a solenoid actuator
- Equipped with an advanced flow sensor of constant-current temperature difference detection type to ensure high-speed response
- Low differential pressure type control available for combustible gases (LP option)
- Use of a normally closed valve to ensure safety
Specification
| Model | 3660 | 3665 |
|---|---|---|
| Flow range (N2 equivalent, 20°C/1 atm | 10 SCCM–20 SLM (freely selectable) | 30 SLM–100 SLM (freely selectable) |
| Sensor | Thermal mass flow sensor | |
| Valve type | Proportional solenoid valve (closed when not energized) | |
| Control range | 2–100% (F.S.) | 5–100% (F.S.) |
| Response | 2 sec. or less (0–100% within ±2% typical) | 3 sec. or less (0–100% within ±2% typical) |
| Accuracy | ±1.0% F.S. (25°C) | ±1.5% F.S. (25°C) |
| Temperature coefficient | ±0.1 F.S./°C (15–35°C) | ±0.2 F.S./°C (15–35°C) |
| Repeatability | ±0.5%F.S. | |
| Operating differential pressure | F.S. ≤ 5 SLM: 50–300 kPa (G) | F.S. ≤ 50 SLM: 150–300 kPa (G) |
| F.S. > 100 SLM: 50–300 kPa (G) | F.S. > 50 SLM: 200–300 kPa (G) | |
| Option: Medium differential pressure (MP) and low differential pressure (LP) specifications are available. | ||
| Allowable operating pressure | 500 kPa (G) or less | |
| Proof pressure | 980 kPa (G) | |
| Leak rate | 1 × 10-8 Pa·m3/s or less (excluding permeation of He) | |
| Allowable ambient temperature | 5–45°C | |
| Allowable ambient humidity | 10–90% (No condensation allowed) | |
| Materials of parts in contact with gases | Body: SUS316 | |
| Valve seat: FKM (option: CR or NBR) | ||
| Sealing: FKM (option: CR or NBR) | ||
| Electric connection | Dsub 9-pin connector as per KFC Standard (Compliant with SEMI Standard) | |
| Flow rate input signals | 0–5 VDC (Input impedance: 1 MΩ or more) | |
| Flow rate output signals | 0–5 VDC (External load resistance: 250 kΩ or more) | |
| Required power supply | +15 VDC (±5%) 100 mA, −15 VDC (±5%) 250 mA | |
| Joint (Main unit bore) | Standard: 1/4SWL Option: 1/8SWL 1/4VCR RC1/4, etc | Standard: 3/8SWL Option: 1/2SWL 3/8VCR RC3/8, etc. |
| Weight | Approx. 1000 g | Approx. 1500 g |
Note
Specifications relating to the flow range (e.g., flow range, accuracy, and response) are expressed in N2 or air equivalent. The product will be built with the primary pressure of 300 kPa or less and the secondary side open to the atmosphere. For details on the pressure requirements, please contact us.
Datasheet: Kofloc 3660 Series
Another Article:
- Kofloc Mass Flow Controller D8500 Series
- Adapter Connector NCS-163-ADF-CH Nanaboshi
- Kofloc Model 3760 Series
- Kofloc Back Pressure Valve Model 6801 Series
- Differential Pressure Flow Meter
- Kofloc Mass Flow Meter and Controllers
- Rotameter Kofloc RK1930/RK1935
- Kofloc CK Series Flow Setting Device Model
- Kofloc 2600 All-Teflon Constant Flow Control Valve
- Kofloc 3660 Series Mass Flow Controller
- Kofloc Model DPM-3 Flow Indicators
- Kofloc FM31 Series Small Karman Vortex Flowmeter
- Kofloc 8500 Series Mass Flow Meter
- Kofloc DF-200C Digital Mass Flow Meter
