Signet 525 Metalex Flow SensorIndonesia Industrial Parts

Description Signet 525 Metalex Flow Sensor

Signet 525 Metalex Flow Sensor combines stainless steel construction with insertion paddlewheel technology (signet 515). the withstands extreme pressure and temperature. Tungsten Carbide shafts with carbon fiber reinforced PTFE bearings provide excellent wear resistance for longer service life. Comprehensive mounting program allows installation of steel conduits with mini locks for small diameters, and mini taps for pipes up to DN300 (12 in). Self-produced signal output using a Signet 8150 battery operated flow monitor.

Signet 525 Metalex Flow Sensor Fields of Application:

Boiler Feedwater Monitoring
HVAC
Chemical Transport
Heat Exchangers
Reverse Osmosis
Cooling Systems
Not suitable for gases

Advantages:

For up to 103 bar (1500 psi @ safety factor 1.5) pressure
DN15 to DN300 (½ to 12 in.) pipe range
Simple installation
Self-powered/no external power required
316 SS body
Tungsten Carbide or SS shaft
7.6 m (25 ft) cable included
Operating range: 0.5 to 6 m (1.6 to 20 ft/s)

Standards:

RoHS compliant
China RoHS

Signet 525 Metalex Flow Sensor Specification

General
Operating Range	0.5 to 6 m/s	1.6 to 20 ft/s
Pipe Size Range	DN15 to DN300	½ to 12 in.
Linearity	±1% of max. range @ 25 °C (77 °F)
Repeatability	±0.5% of max. range @ 25 °C (77 °F)
Min. Reynolds Number Required	4500
Wetted Materials
Sensor Body	316 SS (ACI type CF-8M per ASTM A351), DIN 17440
Retainers (2)	316 stainless steel (1.4401)
Rotor Pin	Tungsten Carbide GRP 1 or 316 stainless steel
Rotor	17-4PH-1 Stainless Steel
Rotor Bearing(2)	Carbon ?ber reinforced PTFE
Gasket	KLINGER®sil C-4401 (supplied with ? tting)
Electrical
Frequency	39 Hz per m/s nominal	12 Hz per ft/s sinusoidal
Amplitude	5 to 8 mV p-p per Hz
Source Impedance	11.6 K?
Cable Type	Cable (per foot) 2 cond. w/shield, 22 AWG
Cable Length	7.6 m (25 ft) can be extended up to 61 m (200 ft)
Max. Temperature/Pressure Rating
Socket Weld or Weld-On Mini-Tap Fittings	103 bar (1500 psi @ safety factor 1.5) @ 149 °C (300 °F)
Strap-on Saddle Fitting	21 bar (305 psi) @ 66 °C (151 °F)
Operating Temperature	-18 °C to 149 °C	0 °F to 300 °F
Standards and Approvals	RoHS compliant, China RoHS
	Lloyd’s Register Type Approval, NSF (P51530-PX version only)
	Manufactured under ISO 9001 for Quality and ISO 14001 for Environmental Management and OHSAS 18001 for Occupational Health and Safety