Kelco Engineering C15 Series Flow Switch

Kelco Engineering C15 Series Flow Switch is versatile magnetically actuated Normally Off flow switches that switch on in response to flow. They are ideal for a multitude of clean liquid applications including pressure boosting and for the direct control of pumps or fans.

Kelco Engineering C15 Series Flow Switch
Kelco Engineering C15 Series Flow Switch

The Descriptions of Kelco Engineering C15 Series Flow Switch

The C15 flow switches can be supplied with reed switch contacts for relay or PLC control or with a built-in 40 Amp solid state switch for the direct control of single phase motors up to 3kW 4HP. The C15 Series flow switches can be used in many clean liquids, including fresh water, seawater, and diesel fuel.

Features of Kelco Engineering C15 Series Flow Switch

  • Australian made
  • Brass & Polypropylene construction
  • Inlet thread is ½ Inch BSP & outlet thread is ¾ BSP
  • Diesel and oil suited models available
  • Choice of reed switch or solid state switch
  • Low head loss design
  • Fully serviceable
  • Static or Dynamic pressure rating up to 100bars 1470psi
  • Spare parts available
  • Weatherproof
  • Maximum flow rate of 30L/min

Installations

The C15 Series flow switches can be positioned in any orientation in the pipework. In vertical piping, flow can be either upward or downward through the switch with very little difference in flow sensitivity. The C15 flow switches are suitable for use with hot or cold liquids up to 90°C. Systems can be steam-sterilized at 100°C for short periods without damaging the switch.

Constructions

The C15 Series flow switch consists of a sealed electrical switching module that saddles a one-piece metal body. The self-contained electrical modules fitted to the C15 flow switches are easily removed without disturbing pipework and can be reversed or rotated independently of the switch body. Within the metal body of the flow switch, a free-fitting magnetically suspended piston actuates the switch as soon as the flow starts. The C15 can tolerate static or dynamic pressures to 100 Bars (1450PSI) with a 4 to 1 safety factor.

Source: kelco.com.au

Read More Articles:

author

Rudy Wiratama

rudywinoto.com/wmablog.com/flowmasonic.com

Similar Posts