Kimo CP210-R – Differential pressure and temperature sensorIndonesia Industrial Parts

About Transmitter

The CP 210-R measures the differential pressure of air (and neutral gases), and is ideal for use in industrial and pharmaceutical applications.

Pressure measurement, etc. of various types of liquids and gasses.
The absolute pressure transmitter is widely used wherever elevation above altimeter measurement is required, such as navigation systems.
Nowadays, these transmitters are also contributing to the weather forecasting field for barometric measurements. They allow weather stations to be miniaturized. For instance, one can forecast the weather using tiny sensors in smartphones or tablets.
Most of the industrial applications demand a partial vacuum. This applies in case of food packaging systems, where residual pressure determines the life of the inside product. The absolute pressure sensor helps ensure the same pressure in each package.
Absolute pressure transmitters are also used in the automation industry. In petrol and diesel vehicles,

Measuring range: CP 211: -100 to +100 Pa, CP 212: -1,000 to +1,000 Pa, and CP 213: -10,000 to +10,000 Pa
Solenoid valve for auto-calibration (CP211/212)
0-5/10 V or 0/4-20 mA outputs
Two relays
Automatic autozero
Quick and easy mounting with the 1/4 turn system with wall-mount plate

General Features
Power supply	24 Vac / Vdc ±10%
	100-240 Vac, 50-60 Hz
	Warning: risk of electric shock
Output	2 x 4-20 mA or 2 x 0-20 mA or 2 x 0-5 V or 2 x 0-10 V (4 wires)
	Common mode voltage <30 vac=”” br=””>Maximum load: 500 Ohms (0/4-20 mA)
	Minimum load: 1 K Ohms (0-5/10 V)
Relay outputs	2 changeover relays
Relay outputs	NO: 5A / NC: 3A / 240 Vac
Galvanic Isolation	Inputs and outputs (100-240 Vac models)
	Device fully protected by
	DOUBLE ISOLATION or REINFORCED ISOLATION
	Outputs (24 Vac/Vdc models)
Consumption	CP210-B: 6 VA / CP210-H: 8 VA
Electrical Connection	Screw terminal block for cables 2.5 mm². Carried out according
Electrical Connection	to the code of good practice
PC communication	USB-Mini Din cable
Environment	Air and neutral gases
Autozero	Manual by push-button; Automatic by solenoid valve
Autozero	(only CP211/CP212)
Type of fluid	Air and neutral gases
Conditions of use (°C/%RH/m)	From -10 to +50°C. In non-condensing condition.
Conditions of use (°C/%RH/m)	From 0 to 2000 m.
Storage Temperature	From -10 to +70°C
Security	Protection class II; Pollution degree 2;
Security	Overvoltage category 2 (OVCII)
European directives	2014/30/EU EMC; 2014/35/EU Low Voltage;
European directives	2011/65/EU RoHS II; 2012/19/EU WEEE
Housing Features
Material	ABS V0 according to UL94
Protection	IP65
Display	75 x 40 mm, LCD 19 digits 2 lines
	Height of digits:
	Values: 10 mm; Units: 5 mm
Connection	Ribbed Ø6.2 mm (CP211/212/213)
Pass-through	For cables Ø6 mm maximum
Cable gland	For cables Ø8 mm maximum
Weight	340g

Configurable intermediate or centre zero ranges
Transmitters	Pressure Range	Air Velocity Range*
CP211	-100/+100 Pa	From 3 to 10 m/s
CP212	-1000/+1000 Pa	From 3 to 30 m/s
CP213	-10 000/+10 000 Pa	From 3 to 85 m/s