General
Contrec 120A Level Monitor accepts a 4-20mA signal from a wide range of level sensors, including Pressure Transmitters, Ultrasonic Sensors or Capacitance Probes, and displays both level and tank contents on a large LCD display. The 120A is a high-accuracy Level Monitor designed to operate with analog level sensors. Having an IP67 weatherproof case, tactile keyboard, and various mounting options makes it a very versatile unit.
Contrec 120A Level Monitor Features
- Non-linear Tank Correction
- Four Level Alarms
- Fully Programmable
- Level Bar Graph Display
- Tank Contents Display
- Powered by 4-20mA Loop
- Panel, Wall and Pipe Mounting
- Watertight to IP67 (Nema 4X)
- CE Compliant
Field Mounting Level Monitor
Solid state relay outputs provide up to four level alarms and a 25 point non-linearity correction table allows the instrument to be programmed to fit most tanks. The Level Monitor is powered entirely from the 4-20mA current loop and, therefore, requires no external power or batteries.
Read More : Contrec Flow Instrumentation
The instrument is fully programmable with set-up parameters such as span, offset, alarm levels, etc, stored in a non-volatile memory which will retain all data for more than 10 years without power. The monitor is housed in a rugged, yet attractive, IP67 (Nema 4X) polycarbonate enclosure which is completely watertight. A wall mounting bracket (no gland holes) is supplied as standard, while panel and pipe mounting brackets are available as options.
Contrec 120A Level Monitor General Specifications
Operating
- Temperature Limits: –20 to +60°C, –4 to +140°F
Enclosure
- Cable Entry: By cable gland
- Materials: Polycarbonate and ABS
Read More : Coltraco Ultrasonics Instruments
Display
- Level: 20 segment LCD bar graph
- Level Span: 0…100% proportional to input signal. Non-inverting tanks – 0% equals 4mA and 100% is 20mA. Inverting tanks – 0% equals 20mA and 100% is 4mA
- Contents: 7 digit 12mm (0.48”) high LCD (continuously powered) with 41/2 digital resolution and trailing zeros
- Interference: CE compliance 4-20mA
- Resolution and Linearity: 0.05% of span Accuracy: 0.05% of span @ 25°C, 0.1% (typically) of span full temperature range
- Update Time: 0.5 second
- Connection: 2 wire
- Voltage Drop: 2.5V maximum High & Low Alarms
- Type: 4 x open collector outputs suitable for driving DC solenoid or external relays.
- The outputs provide:
- 1. high-high,
- 2. high
- 3. low
- 4. low-low
- Switching Power: 200mA, 30Vdc maximum Saturation
- Voltage: 0.8Vdc typical across the output in the “ON” state
- Isolation: All outputs are separately opto-isolated
Download:
Other Article:
- Contrec Flow Instrumentation
- Seametrics Flow Batch Controls
- Contrec 103D Flow Rate Totalizer
- Batch Control and Batching System
- Contrec 120A Level Monitor
- Contrec 214D Batch Controller
- Fluidwell F Series Flow Display and Level Control
