Solinst 101 P7 Water Level Meter measures water levels and total well depth, More consistent measurements with a sensor located at the tip of the probe, Solinst PVDF flat tape has increased tensile strength and electrical efficiency.
About 101 P7 Water Level Meter
The Solinst 101 Water Level Meter with P7 Probe features an extremely durable, laser-marked PVDF flat tape, with an enhanced dog bone design that is thicker, reducing adherence to the side of the good casing.
Features of 101 P7 Water Level Meter
- Durable PVDF non-stretch tape
- Improved electrical properties
- The thicker dog bone design prevents clinging to the sides of the well
- Permanently laser marked every 1/100 ft or each mm
The PVDF flat tape is laser marked every 1/100 ft or each mm; lengths up to 5000 ft (1500 m). The new flat tape has increased tensile strength and electrical efficiency by using 6 strands of copper-coated stainless steel and 13 strands of stainless steel in each conductor. The P7 Water Level Meter Probe is engineered to allow submersion to 1000 ft. (300 m). The sensor at the tip of the probe provides consistently accurate measurements in wells, boreholes, and cascading water, with almost zero displacement.
With a stand-alone design, convenient carrying handle, and sturdy probe holder, the standard reels are ergonomically designed for ease of use. They are robust and smooth running. The battery is housed in a convenient drawer in the front of the reel, allowing quick replacement. The reels are equipped with an on/off sensitivity switch, light, buzzer, battery test button, brake and a tape guide stored on the frame.
Water Level Meter Reels
| Operating temperature of reel: | -20°C to +50°C |
| Submerged operating temperature (tape/probe): | -20°C to +80°C |
| Wetted materials (tape/probe): | P7: PVDF, Santoprene, ®Delrin, ®Viton, 316 stainless steel |
| P2: MDPE, neoprene, Delrin, 316 stainless steel | |
| Probe pressure rating: | P7: Fully submersible to a depth of all tape lengths |
| Reel IP Rating: | IP64 (dust and splashproof) |
| Tape lengths: | P7: 100 to 5000 ft, 30 – 1500 m |
| P2: 100 to 1000 ft, 30 – 300 m |
Length Options
Solinst Model 101 P7 and P2 Water Level Meters are available on reels as shown below, in the following standard lengths:
| Small Reel | * 100 ft. | 30 m |
| * 200 ft. | 60 m | |
| * 300 ft. | 100 m | |
| Medium Reel | * 500 ft. | 150 m |
| * 750 ft. | 250 m | |
| * 1000 ft. | 300 m | |
| Large Reel | 1250 ft. | 400 m |
| X-Large Reel | 1650 ft. | 500 m |
| 2000 ft. | 600 m |
- Polyethylene tapes are only available in these lengths
Other Options
- Carrying Case: Small and medium padded nylon carrying cases
are available, as an optional extra. Their design has a convenient
shoulder strap, zippered front pocket, zippered top, and a
grommet in the base to prevent moisture build-up. - Power Reels: Power reels can be very useful to allow faster or less strenuous operation of longer lengths of tape. They are available as 12V or 110V.
- Replacement Parts: Replacement probes, tapes, and other spare parts are available.
Source: www.solinst.com
Read more article:
- Mechatronics Eurosens BT Fuel Level Monitoring
- Mechatronics Eurosens Dominator RS
- Trafag TOS Optical Level Switch
- Trafag TCS Conductive Level Probe
- Trafag TFS Float Level Switch
You must be logged in to post a comment.