Technoton DUT-E Fuel Level SensorIndonesia Industrial Parts

DUT-E fuel level sensor is used for accurate fuel level and volume measurement in tanks of vehicles and stationary units. DUT-E allows for determining the current fuel volume and changes in the volume (refueling or draining) of fuel in the tank.

DUT-E is used in GPS tracking and vehicle telematics systems as an additional fuel sensor or as a replacement for a standard built-in (factory) fuel level sensor. When used as a part of a telematics system, DUT-E allows reliable and accurate information on the current fuel volume in the tank and reveals misuse and fuel theft from the tank. DUT-E also gives a general overview of fuel usage by vehicle or stationary unit.

Advantages of Technoton DUT-E Fuel Level Sensor

Built on new technology – IoT Burger
DUT-E fuel level sensors are built on IoT Burger technology and support S6 technology. IoT Burger technology allows maximum “on board” data processing. Raw data on fuel level is refined by the sensor and only useful information is sent to the telematics unit. This allows us to avoid blind spots caused by data transfer intervals and get more accurate and stable information in telematics software.
Multi-tank measurement with S6 technology
S6 technology is used to create a network of IoT devices within an object. DUT-E are compatible with S6 technology and that allows to creation of a network of sensors on one vehicle/stationary unit. This feature allows the monitoring of fuel volume in several tanks at the same time and also gives an opportunity to connect other telematics onboard equipment. The main advantage is that all sensors are configured and all data are sent through a single cable, connected to the CAN port of a telematics device.
Cut length by 90%, extend to 6000 mm
The measuring probe of DUT-E can be cut by 90% of its initial length or/and extended to 6000 mm. Length cutting/extension can be done right at the place of installation, just before mounting to the fuel tank. That increases installation speed installation time and reduces costs for sensor delivery to the place of installation, which is especially important for projects where fuel tanks are higher than 1000 mm.

Installation of Technoton DUT-E Fuel Level Sensor

DUT-E has a standard 5-bolted flange and can be installed either in a place where the standard fuel sensor is situated or in a separate aperture in the fuel tank. All necessary details for the installation and sealing of DUT-E sensor are present in DUT-E mounting kit.

When installation of DUT-E is complete, you should perform tank calibration. A calibration table is built in the process, where the output signals of the sensor correspond to correct fuel levels in the tank. This table is used by a fuel monitoring system to determine how much fuel is in the tank.

For More Information and Price: Technoton DUT-E Fuel Level Sensor