TE KPSI 750 Submersible Hydrostatic Level Transducer

TE KPSI 750 Submersible Hydrostatic Level Transducer is specifically designed to meet the rigorous environments encountered in a slurry or highly viscous application. It provides precision depth measurements under most hostile conditions. Every KPSI Transducer utilizes a highly accurate pressure sensor assembly specifically designed for hostile fluids and gases.

The assembly is integrated with supporting electronics in a durable waterproof housing constructed of 316 stainless steel. The attached electrical cable is custom manufactured and includes para-aramid synthetic fiber members to prevent errors due to cable elongation and a unique water block feature that self-seals in the event of accidental cuts to the cable. Each transducer is shipped with our Superdry Vent Filter that prevents moisture from entering the vent tube for at least one year without maintenance, even in the most humid environments.

TE KPSI 750 Submersible Hydrostatic Level Transducer Features

  • Custom Polyurethane or ETFE Cable Lengths
  • Welded 316SS Body Construction
  • Custom Level Ranges up to 115 ft. (35 m) H20
  • Optional Lifetime Lightning Protection
  • Long Life Vent Filter or Aneroid Bellows


  • Lift station monitoring
  • Wastewater
  • Slurry Tanks
  • Pump control

  Another Article:

TE KPSI 750 Submersible Hydrostatic Level Transducer Specification

Parameter Comment
Level Ranges
Full-scale level ranges
(Intermediate level ranges are available)
10 thru 50 ft. (3 thru 15 m) H20 Vented gage reference
Proof pressure 1.5 x FS
Burst pressure 2.0 x FS
Static Performance
Static Accuracy
(combined effects of non-linearity, hysteresis
and repeatability, best fit straight-line method)
±0.25% FSO BFSL method
Resolution ±0.0001% FS
Excitation 9-28V – VDC output
9-28V – mA output
15-28V – VDC output
10-28V – VDC output
0-5V, 0-2.5V, 0-4V
Input current 20 mA max
3.5 mA max
For mA output
For VDC output
Output 4-20mA, 0-5 VDC, 0-2.5VDC,
0-4VDC, 0-10VDC, 1.5-7.5VDC
For ranges < 5 ft. (1.5m) H2O,
only 4-20mA output is available
Zero Offset ±0.25 mA for mA output
< 0.25 VDC for VDC output
Output Impedance See loop diagram for mA output
20 ohm for VDC output
Insulation Resistance 100 mega-ohm at 50 VDC
Circuit Protection Polarity, surge/shorted output
Approximate Weight 3.5 lbs. (1588 g) transducer
0.05 lbs./ft. (79 g/m) cable
Cable jacket material Polyurethane (standard)
ETFE (optional)
Cable pull strength 200 lbs. (90 kg) Polyurethane
Cable number of conductors 4
Cable conductor size 22 AWG
Cable seal Molded polyurethane
FKM Gland
For polyurethane cable
For ETFE cable

Download Datasheet: TE Connectivity KPSI 750 Submersible Level Transducer