Mechatronics Dizzi Fluid Level Sensor

Mechatronics Dizzi Fluid Level Sensor are used for non-contact measurement ( “without insertion” ) of the liquid level (acoustically transparent media). Level measurement is performed by echolocation through the bottom of the tank.

Mechatronics Dizzi Fluid Level Sensor Key Benefits

  • No change in tank design required. All sensor elements are located outside the tank, which is especially important when monitoring aggressive, explosive, sterile fluids, as well as fluids under high pressure
  • Level measurement of almost any liquid, including liquefied gas
  • Built-in self-diagnosis algorithm ensures data reliability
  • Explosion protection marking  ( 0Ex ia IIC T6 Ga, [Ex ia Ga] IIC )


Supply voltage 9 – 30
The thickness of the translucent wall of the tank, mm 0 – 5
Resolution (at rest), mm 0.1
Reverse polarity protection there is
Temperature range, ° C -40 – +85
 Output interface RS-485
Digital protocols LLS, Modbus
Degree of protection IP 67

Eurosens Dizzi Ultrasonic Level Meter : Download Descriptions

Another Article:

Similar Posts