Bamo Ultrasonic Level Transmitter for Liquids BAMOSONIC -

BAMOSONIC is a high performance ultrasonic compact sensor with integrated transducer. This high reliable sensor is supplied by the 4-20 mA loop. Installed on the tank roof, or above the liquid surface to be measured, the transmitters give analogue output proportional to liquid level

BAMOSONIC is recommended for liquid level measurement in sumps or tanks, for tank contents measurement, or open channel flow measurement Four keys provide for programming With the help of the N-DIS plug-in display a full-parameter programming can be accomplished, the parameters of measurement and output can be set using the alphanumeric display module.

Features

Measuring range from 0.2 to 8 m (liquids)
Non-contact level measurement
Power supply by 4-20 mA Loop
IP67 Ingress protection
Option : Plug-in display

Application

BAMOSONIC measures continuously the level of liquid in a tank, without contact with the liquid.

Storage tanks
Weirs and open channels
Waste water lifting units

Another Article:

Specification

Transducer material	PP (Polypropylene)
Transducer material	PVDF (Polyvinylidene fluoride)
Housing	Plastic PBT
Medium temperature	-30°C … +90°C
Ambient temperature	-25°C … +70°C
Pressure*	0.5 … 3 bar (abs.)
Sealing	EPDM (PP model)
Sealing	FPM (PVDF model)
Ingress protection	Transducer IP 68 – Housing IP67
Accuracy	± (0,2% of measured distance + 0,05% of range)
	Under optimal operating conditions and stabilized
	temperature
Resolution	Depending on the measured distance
Resolution	< 2 m : 1 mm; 2…5 m : 2 mm; 5…8 m : 5 mm
Full beam angle	Between 5 et 7°
Power supply	12…36 V DC / 48 …720 mW
Output	Analogue 4-20 mA
Electrical connection	2 x M20 x 1.5 and 2x ½” NPT
	Cable : Ø6…Ø12 mm
	wire cross section: max.1.5 mm²
Electrical protection	Class III