General Information
The ultrasonic flow measurement is based on the phase difference approach. Two sensors are located opposite from each other, alternatively transmitting and receiving ultrasonic signals. With medium flowing there is a phase shift between transmitted and received signals. This phase difference is directly proportional to the flow rate. As no moving parts are concerned, BAMOFLONIC is mechanically reliable.
It is convenient for liquids electrically conductive or not, such as demineralized water, liquid cosmetics, bases or acids, as for these applications:
- Chemicals supply for controlling, logistics, monitoring
- Filling machines, dosing
- Cooling systems, logistics, monitoring
Bamo Ultrasonic flow meter BAMOFLONIC
- 4 instruments ND 10 to ND 25
- For liquids either electrically conductive or not
- 4 scales, from 0.3 up to 240 L/min
- Analogue output: 0/4-20 mA
- Digital output: to configure on site
- Alphanumeric backlighted LCD
Benefits & Features Bamo Ultrasonic flow meter BAMOFLONIC
- Power supply: 24 V DC / 3.6 W
- Connector: M12, Plug 5 pins
- Display: Alphanumeric backlighted LCD
- OutputsAnalogue output: 0/4…20 mA
- Digital output: pulses or alarms for lack of fluid
OPTION: For all parameters configuration, USB /RS485 adaptor, with software - Accuracy Standard: ±2% of reading and ±3 mm/s
OPTION: ±1% of reading and ±3 mm/s, ±6 mm /s for DN10 – 3/8” (according to VDI / VDE 2642) - Repeatability: 0.5%
- Housing: PSU (Polysulfone)
- Protection class: IP 67
- Fluid: Temperature limits: -10…+80°C
- Pipe fittings: G (standard) or on request NPT thread, Clamp connection DIN 11864-3, Tube nozzle
You must be logged in to post a comment.