Alicat Standard CODA Coriolis Mass Flow MetersIndonesia Industrial Parts

Alicat Standard CODA Coriolis Mass Flow Meters use low-flow CODA Coriolis mass flow meters and controllers for measurement and control of true mass flow at an accuracy to ±0.6% of reading.

Specifications of Alicat Standard CODA Coriolis Mass Flow Meters

Devices are custom ranged from 40 g/h full scale to 100 kg/h full scale.
Full-scale ranges: 40 g/h to 100 kg/h
Measurement range: 1% –100% of full scale
Liquid accuracy: ±0.6% of reading or ±0.2 of full scale, whichever is greater
Gas accuracy: ±1% of reading or ±0.2% of full scale, whichever is greater
Repeatability: ±0.1% of full scale
Response time: <100 ms
Operating temperature: –35 to 70°C
Proof pressure: 1500 PSIA (103.4 barA); optional 4,000 PSIA (275.8 barA) for ?100 g/h instruments

Device Features and Accessories of Alicat Standard CODA Coriolis Mass Flow Meters

Features

Measure true mass flow, even when the fluid composition is changing or unknown.
Insensitive to external vibrations to mitigate process disturbances.
High accuracy is needed for mixing at ultra-low flows.
Read measurements from an optional external display.

Accessories

FlowVision software
Optional external display

Device Range

Full scale flow rates range from 40 g/h to 100 kg/h with controllable ranges of 2% to 100% of full scale.

To learn about additional custom flow ranges, please contact Alicat.
For specs on all devices

Build and Performance Options

Communication: Analog, Modbus RTU over RS-232 or RS-485, EtherNet/IP, EtherCAT, PROFINET
Process connections: female SAE (default), male VCR, NPT, Compression, IGS-C Seal, IDEX (1/4-20 flat bottom female)
Displays: None or external
Wetted materials: 316L stainless steel and FKM; optional FFKM, EPDM, PCTFE, 316L stainless steel seals, or nickel alloy
Ingress protection: IP40, IP65, IP66, IP67

Source: www.alicat.com

Read More Articles :