Flux IBC Mixers Slow RunnersIndonesia Industrial Parts

Introduction

Flux IBC-Mixer-Sets For Fluids with a viscosity of up to 12000 mPas. Today the FLUX name is recognized around the globe as the trademark for top standards in pump technology. Everything started with the invention of the electric drum pump in 1950. Nowadays FLUX has an extensive range of products each of which can be customized.

FLUX pumps are used for example in the chemical and pharmaceutical industries; in machinery and plant engineering as well as companies in electroplating, effluent treatment, and the foodstuffs sector. Whether single-product or system solution

The mixing effect that flows develop depends on the shape of the container, the material, and of course the type of mixer. Due to the flexible modular system FLUX is able to offer a wide range of options. This makes it possible to configure the mixer components of the motor, shaft and mixing blade optimally for the application’s requirements. If low speed is required slow running versions can be configured which are provided with intermediate gear and special mixing blades. The FLUX mixers are available in various materials and with different mixing blades.

FLUX mixers for dispersing, emulsifying, homogenizing, chilling, dissolving, mixing, neutralizing, stirring, circulating or exchanging heat efficiently can be used for container sizes from 30 to 30000 liters.

The FLUX mixer program was consistently developed as a modular system. The drive motors are in correspondence with the IEC standard. The mixer shafts in lengths of 150 to 1800 mm are offered in stainless steel 316 L or with a coating in PVDF or PE and can thus be used for various types of liquids.

Features:

Circulating performance: up to 3.600 m³/h
Low speed: approx. 70 rpm
For fluids of up to a viscosity of 10 000 mPas
With gear
Versions available with sliding or folding agitators
Can be used in tanks
For liquids with max. 10 % solids
For run-through systems with 10 – 40 fold flow per hour

Specification:

Viscosity: max. 10.000 mPas*
Circulating performance: max. 3.600 m³/h*
Container sizes: 30 l to 30.000 l*
Individual Components:

IBC Mixers Slow Runners

IBC Mixer EHM 0.55/6-Mo
- For viscosity up to approx. 1 500 mPas
- Circulation rate approx. 2.6 m³/ min based on water
- Rated output 0.55 kW
- Power supply 3~Phase, 50 Hz
- Rated voltage 3 x 400 Volt
- Current at rated voltage Approx. 1.8 Amp.
- Degree of protection IP 55, Isol.-class. F
- Efficiency class IE1, efficiency 67 %
- Rated speed 1 000 rpm
- Type V1 – Flange-Ø 200 mm
- Motor protection switch IP 55, with on/off switch
- Emergency stop For build-up on the motor switch
- Connector cable PUR-cable, 5 m long
- Connector Plug CEE16 with phase changing switch
IBC Mixer EHM 0.75/6-RT
- For viscosity up to approx. 2 000 mPas
- Circulation rate approx. 2.6 m³/ min based on water
- Rated output 0.75 kW
- Power supply 3~Phase, 50 Hz
- Rated voltage 3 x 400 Volt
- Current at rated voltage Approx. 2.0 Amp.
- Degree of protection IP 55, Isol.-class. F
- Efficiency class IE3, efficiency 78.9 %
- Rated speed 1 000 rpm
- Type V1 – Flange-Ø 200 mm
- Motor protection switch (with on-/off-button) On the base plate on the side instead of the terminal box
- Connector cable PUR-cable, 5 m long
- Connector plug CEE16, 400 V/16 A/3P+N+E with phase changing switch
IBC Mixer EHM 1.1/6-RT
- For viscosity up to approx. 2 500 mPas
- Circulation rate approx. 3.8 m³/ min based on water
- Rated output 1.1 kW
- Power supply 3~Phase, 50 Hz
- Rated voltage 3 x 400 Volt
- Current at rated voltage Approx. 2.7 Amp.
- Degree of protection IP 55, Isol.-class. F
- Efficiency IE3, efficiency 81 %
- Rated speed 1 000 rpm
- Type V1 – Flange-Ø 200 mm
- Motor protection switch (with on-/off-button) On the base plate on the side instead of the terminal box
- Connector cable PUR-cable, 5 m long, 4 x 1.5 mm2
- Connector plug CEE16, 400 V/16 A/3P+N+E with phase changing switch
IBC Mixer ESM 0.75/133-RT
- For viscosity up to approx. 6 000 mPas
- Rated output 0.75 kW (IE3)
- Power supply 3~Phase, 50 Hz ¦¦ 60 Hz
- Rated voltage /\230 V, Y380-400 V ¦¦ Y460-480 V
- Current at rated voltage /\~3.50 A,Y~2.00 A ¦¦ Y~2.00 A
- Degree of protection IP 55 (PTC-Sensor) / Isol.-class F
- Rated speed 1 000 rpm ¦¦ 1 200 rpm
- Gear ratio i = 7
- Gearbox speed 133 rpm
- Torque ~ 40 Nm
- Motor protection switch with emergency stop button, 5 m PUR-cable 4-core with CEE- plug assembled on the traverse
IBC Mixer ESM 1.5/70-RT
- For viscosity up to approx.12 000 mPas
- Rated output 1.5 kW (IE3)
- Power supply 3~Phase, 50 Hz ¦¦ 60 Hz
- Rated voltage /\230 V, Y380-400 V ¦¦ Y460-480 V
- Current at rated voltage /\~5.80 A,Y~3.30 A ¦¦ Y~3.30 A
- Degree of protection IP 55 (PTC-Sensor) / Isol.-class F
- Rated speed 1 500 rpm ¦¦ 1 800 rpm
- Gear ratio i = 19
- Gearbox speed 70 rpm
- Torque ~ 150 Nm
- Motor protection switch with emergency stop button, 5 m PUR-cable 4-core with CEE- plug assembled on the traverse

Motor BG90

Rated output		1.5 kW (IE3)
Power supply		3~Phase, 50Hz ¦¦ 60Hz
Rated voltage		/\230V, Y380-400V ¦¦ Y460-480V
Degree of protection		IP 55 (PTC-Sensor) / Isol.-class F
Current at rated	voltage	/\~5.80 A,Y~3.30 A ¦¦ Y~3.30 A
Rated speed		1500 rpm ¦¦ 1800 rpm