SC Hydraulic ABD-2 Air Booster SystemIndonesia Industrial Parts

Introduction

SC Hydraulic Engineering ABD-2 Air Booster System is a leading manufacturer and designer of an ever-growing line of high-pressure, air-driven liquid pumps, as well as air and gas boosters which are being used in a variety of industries and applications.

Growing since 1953, we offer liquid pressures as high as 65,000 psig and can exceed 17,000 psig in gas pressures.

General Product Information

Pressures Up To 250-psi
Includes Air Drive Controls
Weighs Approximately 145-lbs
Equipped With One Abd-2 Booster
High Flow, Low-Pressure Applications
15-gallon Asme Receiver To Increase Flow Capacity

The S10320-ABD-2 Air Booster System is built for high-volume applications requiring up to 250 psi air reserve in a 15-gallon ASME receiver with our double-acting 2:1 ratio air booster.

The booster and receiver are mounted on a heavy-duty skid with forklift provisions and weigh approximately 145 pounds. Installation is simple with a 3/4″ NPT inlet to an inline filter and a 1/2″ NPT outlet high-pressure regulator. The receiver is protected with a safety relief valve and has both receiver and regulator pressure gauges.

This system is a low-cost solution when high pressure and relatively high volumes of air is required in a pneumatic application. Contact us or one of our authorized distributors for application or sizing assistance.

Application

Increase plant air pressure
Applications requiring higher flow
Increase maximum torque on small air tools
Increase marginal air pressure to valve actuators
Extra force for small air clamps, roll tensioners, assembly machines and air presses

Dimensions

MODEL SELECTION CHART
Model No.	Maximum Rated Air Supply (Ps)	Maximum Rated Air Outlet (Po)	Connection Ports			Static Outlet Stall Pressure	Actual Area Ratio	Displacement Per Stroke (in3 per cycle)
			Air Drive	Air Inlet	Air Outlet
ABD-2	150 psig	300 psig	3/4″ NPT	1/2″ NPT	1/2″ NPT	Pa + Ps	2:01	223
	10.3 bar	21 bar

Modification

M202 – Remote Pilot:This option provides a 1/8” NPT female port for remotely controlling the start/stop of the pump by connecting an external air signal to actuate the air cycling valve.