Danfoss MBS Series Pressure TransmittersIndonesia Industrial Parts

OEM Pressure Transmitters

The compact OEM pressure transmitters programme is designed for use in severe hydraulic applications. The programme consists of two series:

MBS 1200 – without integrated pulse-snubber
MBS 1250 – with integrated pulse-snubber

The integrated pulse-snubber offers a high degree of protection against cavitations and liquid hammer, and the well thought out design results in excellent vibration stability and an exceptional robustness.

The high degree of EMI protection equips the pressure transmitters to meet most requirements.

Features

Designed for use in severe OEM applications
For medium and ambient temperatures up to 125 °C
All standard output signals:
4 – 20 mA, 0 – 5 V, 1 – 5 V, 1 – 6 V,
0 – 10 V, 10 – 90% ratiometric voltage
Wetted parts made of stainless steel
A wide range of pressure and electrical connections
EMC protection up to 100 V/m
Dual output transmitter – for further information please contact Danfoss

Applications

Cavitation, liquid hammer and pressure peaks may occur in liquid-filled systems with changes in flow velocity, e.g. fast closing of a valve or pump starts and stops. The problem may occur on the inlet and outlet side, even at rather low operating pressures. The media viscosity has only little effect on the response time. Even at viscosities up to 100 cSt, the response time will not exceed 4 ms.

Approvals

UL 508 recognized
ISO 7637 pulse 1 – 4

Technical Data

Performance (EN 60770)

Accuracy (incl. nonlinearity, hysteresis and repeatability)	± 0.5% FS
Thermal zero point shift	<± 0.15% FS / 10K
Thermal span shift	<± 0.15% FS / 10K
Response time liquids (10 – 90%)	> 0.5 ms
Durability, P: 10 – 90% FS	>10 × 10? cycles

Overload and burst pressure – without pulse-snubber (MBS 1200)

Nominal pressure [bar]	10	16	25	40	60	100	160	250	400	500	600	1000*	1600*	2200*
Overload pressure	30	48	80	80	140	200	320	500	800	1400	1400	2000	2500	3000
Burst pressure	400	640	800	800	1400	2000	1600	2500	4000	>4000	>4000	>4000	>4000	>4000

* Only available with M12 × 1 1.5 P high pressure port, type FC06. Please contact Danfoss.
Overload and burst pressure – with integrated pulse-snubber (MBS 1250)

Nominal pressure [bar]	10	16	25	40	60	100	160	250	400	500	600
Overload pressure	30	48	120	120	210	300	480	750	1200	2100	2100
Burst pressure	400	640	800	800	1400	2000	1600	2500	4000	>4000	>4000

Electrical specifications

Nom. output signal (Short-circuit protected)	4 – 20 mA	0 – 5, 1 – 5	0 – 10 V	10 – 90%
Nom. output signal (Short-circuit protected)	(2 wire)	1 – 6 V	0 – 10 V	ratiometric
Supply voltage [UB], polarity protected	8 – 30 V	8 – 30 V	12 – 30 V	5 V ± 0.5 V
Supply – current consumption	–	4.5 mA	4.5 mA	4.5 mA
Output impedance	–	? 90 ?	? 90 ?	? 90 ?
Load [RL] (connected to 0 V )	See chart below	RL ? 10 k?	RL ? 10 k?	RL ? 5 k?
Load [RL] (connected to + V )	See chart below	Not possible	Not possible	RL ? 5 k?