M8 E2B, Omron Proximity Sensor

M8 E2B, Omron Proximity Sensor

The new E2B proximity sensors promise the perfect fit for your particular needs. With the wide range of models in the E2B family, you can choose the one that exactly meets your needs. For example, we have four different sizes: M8, M12, M18, and M30, each one with single or double sensing distances, shielded, and unshielded.

There’s also a choice of short and long bodies, two connecting methods, and four output types. With this range to choose from, you’re certain to find the perfect fit.

Features

  • Perfect fit for standard environments
  • 372 models
  • Single and double sensing distances (M8, M12, M18, and M30)
  • Time and cost-saving
  • Global deliveries and support

Specifications

 

 

 

 

Item

Size M8
Sensing distance Single Double
Type Shielded Unshielded Shielded Unshielded
Model E2B-S08@S01 E2B-S08@N02 E2B-S08@S02 E2B-S08@N04
Sensing distance 1.5 mm ± 10% 2 mm ± 10% 2 mm ± 10% 4 mm ± 10%
Setting distance 0 to 1.2 mm 0 to 1.6 mm 0 to 1.6 mm 0 to 3.2 mm
Differential travel 10% max. of sensing distance
Detectable object Ferrous metal (The sensing distance decreases with non-ferrous metal.)
Standard sensing object (mild steel ST37) 8 × 8 × 1 mm 8 × 8 × 1 mm 8 × 8 × 1 mm 12 × 12 × 1 mm
Response frequency (See note 1.) 2,000 Hz 1,000 Hz 1,500 Hz 1,000 Hz
Power supply voltage 10 to 30 VDC. (including 10% ripple (p-p))
Current consumption 10 mA max.
Output type -B models: PNP open collector

-C models: NPN open collector

 

Control output

Load current (See note 2.) 200 mA max. (30 VDC max.)
Residual voltage 2 V max. (under load current of 200 mA with cable length of 2 m)
Indicator Operation indicator (Yellow LED)
Operation mode

(with sensing object approaching)

-B1/-C1 models: NO

-B2/-C2 models: NC

Protection circuit Output reverse polarity protection, Power source circuit reverse polarity protection, Surge suppressor, Short-circuit protection
Ambient air temperature Operation and storage : -25 to 70ºC (with no icing or condensation)
Temperature influence (See note 2.) ±10% max. of sensing distance at 23ºC within temperature range of -10 to 55ºC

±15% max. of sensing distance at 23ºC within temperature range of -25 to 70ºC

Ambient humidity Operation and Storage: 35 to 95%
Voltage influence ±1% max. of sensing distance in 24 V ±15%
Insulation resistance 50 MÙ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength 1,000 VAC at 50/60 Hz for 1 min between current-carrying parts and case
Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y and Z directions
Shock resistance 500 m/s2, 10 times each in X, Y and Z directions
Standard and listings (1) IP67 (IEC60529) (2) EMC (EN60947-5-2)
Connecting method Pre-wired models (standard is 4 mm dia. PVC cable with length = 2 m, 5 m). Connector models (M8-3pin)
Weight (packaged) Pre-wired model Short body: Approx. 65 g, Long body: Approx. 65 g
Connector model Short body: Approx. 20 g, Long body: Approx. 20 g
 

Material

Case Stainless steel (1.4305 (W.-No.), SUS 303 (AISI), 2346 (SS).)
Sensing surface PBT
Cable Standard cable is 4 mm dia. PVC.
Clamping nut Brass-nickel plated

Note:

  1. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object between sensing objects, and a setting distance of half the sensing distance.
  2. When using any model of M8 size at an ambient temperature between -25ºC and 60ºC, use a load current of 200mA max., at an ambient temperature between 60ºC and 70ºC, use a load current of 100 mA max.

Download Catalog: E2B PROXIMITY SENSORS

Ref: Omron.co.id

Share
%d bloggers like this: